Lift strapping on the bone crochet circuit. Lifting crochet: schemes and job description

30.11.2020

Of course, roast summer favorites are topics. They can be divided into two types: either it is a knitted canvas with an emphasis on the decor, or a bodice, supplemented by a web. The bodies in modern fashion became not a detail of clothes, but an independent element of the wardrobe. They are not hidden, on the contrary, they focus on the decoration and originality of mating. We suggest to consider the various ways of their execution.
A few words about letters. They may be different. The main requirement for them is the density, the ability to keep the form. The best approaches the failure and C1N (columns with one nakid).
For very small sizes You can use the canvas of a rectangular or triangular for-we associated in various directions. View options. 1, 2, 3.

Attention!!! Click pictures are increasing.

The rectangular canvas can be beautifully draped, pull the cords and to create the bulge of the canvas. In the triangular form grains, the volume is formed when tieding: the edges of the web need to be slightly pulled by the columns without a Nakid.
The triangle associated according to Scheme 1 has bulges in the method of mating. It can be increased, slightly pulling the bottom of the cup during the strapping of the fail. For sizes 44-46, the volume of the cup must be greater. In this case, the knitting vaant is suitable according to Scheme 2 (photo 1). It should be noted that the scheme reflects the principle of knitting, but does not give real sizes. The number of columns and the number of knitting series you must calculate in size and mating density. Rows C1N can be of different colors, if it coincides with the total composition of the top. Strips of various colors emphasize the shape of a cup. When knitting such a cup of failures (Scheme 3), the hook can be administered traditionally under both weapons, and you can knit for the rear wall. In the last version, the web is becoming relief.
Very comfortable cups associated with horizontal or vertical sweeps.
In the first case (Scheme 4), it is necessary to calculate the number of failures for the widest place of the cup (measuring the bra), to dial to 6-8 a bit less and add them when knitting the bottom of the cup. Cut in partial knitting. In the proposed scheme, the "step" of partial knitting consists of 3 failures. In the first row of partial knitting (15th row of circuit), do not check 3 fails, make the VP to lift, turn the knitting, check the row and at the end of it (16th row according to the scheme) also do not knit the last 3 fails. Continue knitting in this way until 5-8 fails remain. A smaller number of failures gives a cup that is not necessary in this option sharpness. Note that the number of "steps" on each side should be the same. The result is half a cup that you see in photo 2.
So that it does not work out holes and crushes of the last failure "Stairs", knit as follows: In addition, the hook in the head of the latter "Stairs", remove the pH (working thread), but do not check. Enter the hook behind the leg of the last series of the previous row (photo 3), remove the pH and check all the loops together. Provide usually the 3rd and 2nd fails of the next "step" (photo 4), and the last fail - as opi-sano above. Tied to the end, turn knitting and check the same number of the next row. In the result, it turns out smoothly zak-burglar cloth (photo 5).

Continue knitting, having reduced in each row from the right and left sides to one after. Return from the edge one after a bit, it will be easier to tidy. The last 4-5 fails continue to knit exactly, it will be a strap. Look in a fully connected cup on photo 6. During knitting, try on a cup. If you consider that it is not convex enough, change the number of scuns in the "steps", for example 3-2-3-2 or 2-2-2 ...
A cup with vertical pulp (photo 7) Knit according to the scheme 5. Its size can be corrected, changing the initial number of the VP and the intensity of the additions and lifting items (two instead of one or alternating them). Such cups will be lied classically and are suitable for almost all sizes. The width of the cup when necessary can be changed, de-brimming with lace or hurdling elements.
A variant of knitting from the center of triangles (Scheme 6, photo 8) is very popular.

Particularly spectacular cups with dilated stripes (see photo 9). Their small disadvantage is a limitation in size on which they look good.

Very interesting way to knit care cups according to the "3/4 square" principle. His dignity is a lot of rianity.
Option first - Classic form in fig. 4, photo 10.
The canvas of such a cup knit from the wider part of the ab. Small sides align and susht. On the top of the cup, place the seam under the breast or on top, depending on your taste. You get the same form of a cup when knitting a square according to scheme 7.
Option second - Figure 5: Type the VA VP and knit with add to the middle of the web (point A). Align the points in and a cup in a straight BVB * Single to the canvas. The central part of the canvase will look in interest, if it is knitting it a simple and sufficiently dense pattern, for example, "Rogul-Kami" according to scheme 8, or others at your discretion.

Option Third - the cup will look like, in which one (Fig. 6) or each third of the web (Fig. 7) consists of a square motive. In the photo 11 bodies form three classically knitted from the center of the square.
Four option - Scheme 9. General view in photo 12. All the same Maja Square is based on a cup. Os-altal 2 / 3rd web connects UBN on two sides of the square without add-ons.
Pay attention to the sweep at the bottom of the chap. Tie them two or three in depending on size. The upper part of the Chap Schoke can well be associated openwork, as in Scheme 10. It has been largely shown that Zak-rig is associated with one side.

Fifth option according to Scheme 11. Total view of the web Look in Fig. 8. So it will turn out when knitting from the line AB. To round the shape of the interior of the canvas, knit by semi-brass. On the right side of the canvas, knit the accurate, and the upper part is partial knitting. The Horizontal and vertical lines should be the same, they must be sewn. Cups of such a form are very conveniently sitting on the chest of any size. If you want to have a beautiful product, but not knit a bodice, you can link the guipure elements and put them on your favorite bra so that it is not visible. An openwork canvas sewn from the bottom will turn it into a spectacular top.

Crochet Bras or Top for Summer Dress

Crochet bra bug

top for summer dresses

the author of the class master elenaBaw.

We start knit from the bodice of the bodice. I started with 5 columns with a cape closed in 1 loop. The second row is to double the number of columns, and in the center to plunge 3 into one loop and knit these 3 columns each row to the top of the chest, then without add

At the edges of the part it is necessary to subscribe or add, for this we constantly apply the item to the bra and see add needed or drop or knit smooth
4.

We get this detail. The second knit absolutely also, only turn it on the other side

5.

Next, we need to be beautifully consolidated by our details based on the edge of the bra we make a marking seam as in the photo
6.

Bottom along the bone also deposit seam

We apply the associated detail to the lifu, it is better to notice it or pinch with needles so that there is no offset. And we begin to tie the columns without an attachment around the edge, clinging to the loops of the seams that we did on the bid (see the master class which is listed above, is clearly visible as it is done)

That's what it turns out

And the view from the inside, quite carefully, only better to sneak into the tone of the bra, I noticed this mistake when everything was done, I will take into account for the future

10.

11.

We take a seam along the bones from the bottom and the columns without an attachment we join, engaging for the loop of the seam

12.

We left to tie the back. In principle, you can cut this part of the bra and replace it with knitted. But I decided to leave and tie up this part of the bodice. For this, around the edges again we are cutting

13.

Knit constantly trying on and pulling a bit of the bodice, that is, the knitted item will be more in size, then we attach it to the columns without Nakid, also constantly pulling out, so we will have a little "worry", but it's good to sit on the body well. On the part where the hooks make small holes for hooks so that you can be fastened to any of them if desired
14.

We left to tie straps. Sut off the straps of a bra, remove the rings from them

15.

We link the rings with columns without a nakid and knit straps. Front straps I knit according to the scheme http://modnoe-vjazanie.com/images/stories/img/cruchok/top/cxema/tp_071-1
16.

These are also lazychs

17.

The rear straps are just the columns without a nakid, I have 3 column width

18.

We wear rings as it was on a bra, thanks to this, we can regulate the length of the straps, it is important because they can stretch in the socks. It remains to connect everything and ready! :)

19.

Back view

In the hot season, when shorts and short topics are wrapped in fashion. It's time to move the brains about how to vary your own image and do something unusual.

Very stylish and especially swimsuit, either just a bodice of a dress associated with her own hands. Detailed description Crochet leaf knitting techniques with diagrams of various mating - a burning topic for each modern fashionista. crochet linear lace video crochet Hat Caps

A knitted bodice can be made on personal size and suitable for both large breast owners and Majakhanka. Depending on personal preferences and physical data, you can choose the desired form and technique of mating.

crochet samples and schemes

A more appropriate method of knitting a crochet is an ordinary column without an attachment or with one nakida - so the canvas gets more dense and will keep the right shape.

all about knitting rugged crochet

Description of Lami Forms

Different forms suitable for the leaf as an independent view of clothes and part of the dress or the topic can be found a lot. In most cases, the triangular shapes and the drapery of the rectangular canvas are consumed, only the method of configuring parts differs. The method is very popular under the title "3/4 square" and implies from several embodiments:

crochet Warm Haps

1. Grade method. A cup is configured from a wide part (on scheme a-b) In the direction upwards. When the cloth is ready, the smallest sides are binding to each other and the bulk part of the bodice is obtained. Seam is located under the breast and plays the role of the molding;

ending crochet

2. The required amount of air loops along the VAV line (Fig. 5). Next, the web is configured using add-ons for the median line A. Then the Vasp Line line binds and the finished bodice can be seen to the top or dress;

crochet Caps Baby

3. Lifth consisting of small square parts. It can only be one part, and maybe all three. Very interesting, bodies made from classic squares, which are signed out of the middle (see Fig. 11);

free Crochet Crochet Knitting Schemes

It is very interesting to see the bodice associated with the middle three triangles.

crochet kids hats

crochet Kushaki

With such a bodice, it is convenient to work and choose various patterns of patterns. As an option, you can connect triangles with each other with no columns without a nakid, but a lace fillet knitting.

crochet knitted for beginners

In order to make such cups more convex, on the sides they must be tied up with columns without Nakid, which will be less than the side of the side loops. The edges of the leaf are striking and the desired form will be.

warm mittens knitting circuit

You can connect a fully openwork bodice. It almost always will be drawn from the middle in a circle, by type of napkins. In this case, he will not have convex form And for it, it will have to either be tied up, or leave because there is.

crochet tops

crochet jackets for women

The finished bodice can be tied with the same threads to the dress, a light top, or just make a swimsuit.

knitted Topics Crochet Schemes

Bone crochet

If you want to give the leaf a more volumetric form, then you can try to link the bodice on the bone. For this, some materials will be required:

free crochet magazines

Threads, the ideal of all cotton (stretch);
Bones;
Knitted grid for plating;
Suitable hook;
Treads sewing in color, needle.

First, measure the length of the seed and cut off the knitted mesh corresponding to it, taking into account the bending. Before stitching, the grid must be folded in half into four layers (in width). Then turn the bone and stitched with an ordinary needle, the surplus of the fabric at the end will need to be cut off.

crochet shaved scarf diagram Verena

For further work, it will be the most convenient to choose the finished bodice with the desired sample cup. The number of air loops is calculated independently depending on the density of mating and pattern.

crochet model slippers

A cup will consist of lower petal and top. You need to start from Lower:

knitting hooker for doll

Score three air loops, a column without a nakid in the middle loop. Such a macar is obtained by a triangle;
Because the bottom petal will be accurate from the inner corner of the bra, the desired size must be constantly checked by add;
Closer to the middle, it is not worth adding a loop, knitting one line;
Next, we approve again on Crow Lifa.

It is necessary to constantly taste with the sample, to apply literally each row.

multicolor crochet circuit

crochet Schemes Toys Napkins

The top of the cup fit in a straight line, without add-ons. The pattern can be selected independently. The height of the vertex is also selected individually to everyone.

In order to insert in the bone cups, an additional 7 rows by a column without an ingredient at the bottom edge are tied. The bones are turned around with lower rows and are fed by thread.

How to calculate air loops

The calculation of the number of air loops will depend on the selected model and individual sizes. If you plan to do withdrawal, then in the appropriate scheme will provide recommendations for the set of air loops.

knitting for children hooked newborns

When selecting ordinary classic models, the mating density is calculated, depending on the selected material and pattern.

For the manufacture of a knitted swimwear, you can use cups of bras. We look at the master class about how to tie them with crochet.

It will be about this model of swimsuit:

Knitting scheme below.

We take the needed cup, special or from an old bra or swimsuit and we are wearing such stitches, as if imitating overlocks (for the loops that came along the upper edge we will tie the cup itself).

Knit an elastic set of the edge (a simple chain of air loops will not allow to pull the knitted part to the cup), equal to the length of the cup along the inside.

We sew a cup of drawing and that's what we get:

In order to do not work holes in the process of binding parts of the cup, I knit all the cup with two rows of art. without NAK. Next, not taking off the threads, they see each loop of Art. without NAK. And the shelling of the sheath on the cup at the same time in 1 tbsp. without NAK. And so in a circle. Tip: First, lock the knitted part with multiple stitches around the perimeter to avoid the distortion, and then delete these threads.

Slit another series of art. without. Na., and then a number of Art. with NAC. It turns out that this edge as if bends himself inside: