Sharpening a careless razor and looking after it: honing. What kind of stone is needed to sharpen razors to a sharp point? Wider grinding of vikoristan stones for sharpening
Sharpening a careless razor is no less a tedious process for using this tool, lower leg. Once you learn to sharpen a careless razor, you will be able to handle any cutting object. For such a beginner, it will be good for every person’s skin.
In order to sharpen a dangerous razor, carved stones are used. As if you didn’t want to spare, you’ll end up wasting money on a bunch of copies, which you’ll be victorious about as soon as possible. Today, synthetic stones are often used for safety razors, which you can buy from our store for safety razors and accessories.
Buy stones for unsafe razors from britvaopasnaya.ru
Our online store is a specialized store of safety razors and accessories. We work directly with manufacturers, which means that we present only original products. From our great catalogue, you can buy stones for sharpening unsafe razors, belts for straightening unsafe razors, as well as unsafe razors from manufacturers and light manufacturers: Solingen and Thiers Issard. Solingen razors are available in two lines. From us you can buy the reliable Dovo Solingen and Erbe Solingen razors.
With proper care, these clear razors will serve you for decades. To make your shin comfortable and safe, you will need to buy a stone for sharpening your unsafe razor and a belt for straightening it. We don’t know how to choose the right stone for a rough razor.
Choosing a stone for sharpening a dangerous razor
People who have just recently acquired an unsafe razor are often ruined by the great prospects of the current market and cannot choose the right stone for their tool. Carved materials, quilting, softness – it’s really easy to get lost. Your choice may be stones that are cut by stepping morsels.
1. A good stone for sharpening a rough razor will be the same. It is important to admire its surface. Vaughn may be ideally equal visually. If you are careful about the presentation on it, and the heterogeneity, it is better to look at such a stone.2. Size matters! The most suitable stones are 150×50. You can stay on top of the market with other propositions: 60×180, 70×200 and others. We recommend that you reach the optimal size so as not to overpay and sharpen your unsafe razor with maximum comfort.3. Assess the shape of the stone. The wine may be equal on all sides. Often there are unclear words, in which only one side is declared equal. Get ready before you bathe the brightly colored stone.
For thorough and precise sharpening of a fragile razor, you will need a splinter of stones of different grain sizes: #500; #1000; #3000; #5000; #6000; #8000; #10000.The first stone will be at your disposal for correcting the geometry of a faulty razor, rough cutting of the cutting edge and repairs. Further sharpening can be done on a stone with a larger crossbar.
Natural or synthetic?
Among the owners of careless razors, they don’t hear super tips about those who prefer to use stone to sharpen their tools: synthetic or natural. Let's try to adapt to this diet. For a long time, stones made in Belgium and Germany have been highly valued. This is a natural stone made from slate. They were called koli “razor stones.” If progress does not stand still, alternative options can be proposed. In the meantime, synthetic stones from Japanese production will become increasingly popular. Why are the stinks more beautiful and why are they worse?
1. Think about what nature can give us, and what tools are available for the production of synthetic stones. The slate can be heterogeneous in places, have different grain sizes, and come out step by step out of tune, which can be sharpened to a lesser degree over and over again. Unfortunately, nature did not allow the creation of stones for sharpening razors, so it was not in their plans to make them ideal. Therefore, with a careful approach to the preparation of such a stone, uniform images will emerge without thickening, subtraction or small depressions.
2. The proven fakhivts are sharpened by the same skillful choice of stones created by nature. It seems that a thin razor sharpened on such stones is much more comfortable.
3. The quarrying of natural stone is a reference to tradition. You will sharpen your gondola tools the same way your ancestors did. As you choose from stones, choose only for you. Still, for beginners, we recommend synthetic stones, as they are easier to use. Alternative The current market is ready to give us alternative options for sharpening stones for sharpening unsafe razors and other methods that you should evaluate. We recommend that you try leather with them to see which suits you best. It is necessary that the sharpening process brings maximum comfort and satisfaction.
Vodyane stone
Most often, such stones are hardened for sharpening woodworking tools. However, it is also suitable for a dangerous razor. Use this tool for honing the razor (even rough sharpening), if the tool no longer works, as described above.
Water stones are also available in synthetic and natural varieties. The most commonly used materials for such materials are aluminum, silicon carbide and ceramics. Before using the stone, you need to soak the stone thoroughly. Buy a stone for sharpening unsafe razors depending on the size of the tool itself. Make sure that the blade of the razor is not larger than the width of the stone. It’s best to add a small amount of water stone to sharpen your tool.
Ceramic honi
These are old-fashioned stones for sharpening faulty razors, which you can still buy from ordinary stores, but you might end up searching for them. You can add ham or diamond-cut ingredients. This stone gave rise to the name “butcher’s cut.” The stinks are of lower, lower water stones, so they can be used for fine processing of the cutting edge. As a rule, it takes very small touches to give a fairly clear result. Suitable for dry work. You can also wet such a stone. Everything depends on how comfortable you are with working in this or any other way.
Dry abrasive grit or emery paper
This method can only be tried as an experiment, as you are unlikely to succeed. The emery paper will require frequent replacement, although it is inexpensive. How important it is that the razor is sharpened
For a beginner, it may be difficult to tell that the cutting edge of the razor is perfect and perfect. There are two effective ways to determine how bad your razor is. For this you can use a hair on a vase or a microscope. It’s better to combine them.
For the cob, try cutting the hair on the vase with your unsafe razor. You can earn money on your hands without sticking out your skins. If a razor cuts hairs, then it can be cured. Then admire it under the microscope. With an increase of 500 times, the cutting edge becomes mirror-like and there are no small spots or stains.
Wider grinding of vikoristan stones for sharpening
If you start to pick at the stone of an unsafe razor and have not yet sharpened it completely, you may encounter some side effects and side effects. To get the hang of bringing the cutting edge to perfection, we recommend avoiding cuts that are less over-processed.
Severe pain in the hand
You work with the razor for one year, then a fourth, and your axle is brought to perfection, less than a hair! Remember that you have been practicing for a long time, then be prepared to stiffen your fingers or your entire pen may experience a spasm. Vin manifests itself as sharp pain.
The fault lies not in the sharpening process, but afterwards. Throughout the evening, we do not recommend that you carry sensitive objects in your hands, or touch children or animals in your hands, because you may lose them through sharp pain. It’s also not a good idea to go barefoot immediately after sharpening. This can lead to injury. And if you let the razor slip, it will result in chips and the blade will have to be sharpened again or bought a new tool. Who cares enough that it is necessary to go to the doctor through such speeches. On the right, the spasm cannot be overcome. Newbies are toiling but ready for such an effect.
Uzdovzh leza ta po kol
Regardless of all the respect to these people who taught you to sharpen kitchen knives and other cutting tools, you are guilty of marveling at the facts and using a stone to straighten unsafe razors correctly. It is your responsibility to clearly identify what processes are taking place on the cutting edge through other manipulations with the stones. And the first thing you need to know is that any stone is cast on the edge of the rag, right up to the final stages of cutting.
If you rub the cutting edge across the stone, it will positively affect the sharpness of the razor. There will be furrows across the forest. In this case, the razor is highly effective when chopping, cutting and planing and does not become dull for a long time.
It is impossible to say that the circle and late ruins will not lead to the point where the razor becomes sharp. However, it would be unfortunate to lose something like this. On the right is that late furrows create finesse in active places. This can lead to the fact that the razor gradually breaks off in weakened areas. "It's thin, it's going to tear." With this approach, you will often end up cutting the stone of an unsafe razor. It is acceptable to set round and long edges on non-abrasive stones so as not to cut the edge. Such a stone is not a safe razor and is used as a valuable tool.
Don't emboss!
The overwhelming pressure on the tool - the supply of new hairless razors has been expanded. It is important to understand the gradations here. On the very tip of sharpening, when rough cutting the cutting edge, the pressure on the razor can be significant. With further use of the razor, you must step by step change the pressure. In the final stages, the razor may be pressed onto the stone under the steam of moisture. In a series of episodes, this pressure must be changed.
Why is it so important? On the right, under great pressure the razor bends, and you chip not the tip of the cutting edge, but a little bit more. This will not lead to a positive result and you can condemn the razor for special efforts.
External appearance and efficiency?
It's common practice for fakhivs to use electrical tape or other scrapers when using a stone to straighten faulty razors and sharpen them. For a short-line perspective, this will not lead to serious problems. However, after 10-15 such sharpenings, the razor will become more efficient. Why? Need some explanation.
Electrical tape and other tapes are sealed to prevent damage to the blade of the razor with abrasive materials. This approach ensures that the razor looks aesthetically pleasing, does not lose its hairiness, and maintains mirror-like cleanliness. If you use such devices, you destroy the geometry of the instrument. We have already prepared it in such a way that the leather can be sharpened without resorting to the use of other materials and tools other than stones.
If you use electrical tape, you change the point of sharpening. He's becoming dumber. Apparently, the razor itself is gradually becoming duller and duller, regardless of those who use a microscope to control it and other tricks. Therefore, we strongly do not recommend using duct tape. The choice of unclear abrasive materials It is difficult for a beginner to buy a stone for unsafe razors and not have any choice. If you buy a cheap stone of low quality, you risk not only not achieving the desired result, but also damaging your razor. Such viruses are sold daily at prices ranging from 20 to 200 rubles. As a rule, stinks are made in China.
This means that an abrasive stone is not suitable for you. Take a moment to marvel at the price tag. A great tool cannot be priced that cheaply. After bathing, test the stone to see if it is less gentle than a razor. Take a kitchen knife and try to sharpen it. Just as in the process the grains are spun from the stone and the stench grows out in new small purchases, it can be thrown away by “buying yourself wisely” in this way.
What are these nasty grains that sprout? The stench can be simply fatal to the cutting edge! As they prickle, the stinks begin to roll between the surface of the stone and the cutting edge. This will lead to damage and serious chips. Of course, this has a negative meaning in the language.
Virtue the stone!
It is very rare that you can sharpen a perfectly smooth stone that will become a faithful friend of your unsafe razor. So, be it a stone, whether it’s just out of the packaging or an old one, that you’ve already received before, it’s time to check before the vicorists. The culprit will be DMT grade stones. In the midst of such products, there are increasing number of crooked products that require improvement. Finished - complete the folding process. You can use other stones, cutting edges or special tools. Whose food is better not to be cut off once again and go crazy.
Purification before vikoristannyam
At the hour of preservation, the stone is covered with a saw. The saw parts can be small or small, but can be used as an additional abrasive, which is important in work. Wave your hand, sweeping everything from stone, both in front of vikorstans and robots. Rinse and soak the water stones promptly to achieve maximum results.
Since you can carefully use stones for sharpening unsafe razors, which you can buy in our certified online store, then your tool will delight you with its sharpness and efficiency. Don’t try standard favors and don’t try to get too comfortable!
Nizh accompanies people from early childhood to old age. All of us know that most often it is the bluntest thing that grows the hand. For this, it is enough for the blade to be raised from the surface.
In order to be unique and also to complete the cutting process, sharpen your knives with a quick and comfortable knife. There are a lot of different devices and methods for sharpening knives, so take a look at their reports.
Imprisonment: principle and options
Sharpening a blade is the process of abrading the edges throughout the entire length of the blade under a sharp edge. Where the sharpening lies in the hardness of the steel and the treasure that stands in front of the blade. So, for everyday kitchen knives, sharpening should be set at 30...35 degrees, while sharpening knives should be sharpened at 40...45.
Blades that require special blade sharpness, such as cook knives or knives for professional processing of products, should be sharpened at 25 degrees.
Closely take a look at the edges of sharpened razors and surgical instruments, as they require sharp blades. For a non-safe razor, the sharpening point should be 14...15, for a surgical instrument - 12 to 25 degrees.
Sharpening of knives is carried out using two methods: manually with the help of abrasive stones or special attachments and mechanically by sharpening the sharpening bench with an abrasive wheel that wraps around.
The first option emphasizes the obviousness of beginners, but at the same time it is easier for a mastered and accessible user. For sharpening, abrasive stones of different types and widths are used:
- Arkansas, known as novaculite;
- Japanese water stone;
- diamond bars;
- ceramics
Each type of stone has its advantages and disadvantages. These stones will be looked at a little lower. For quick sharpening of kitchen knives, often sharpen the blades with fixed or replaceable fastenings of abrasive surfaces, which are sharpened by moving the blade between the sharpening surfaces.
Mechanical sharpening on a bench is much simpler, less expensive per hour, and requires constant temperature control and adherence to safety rules.
Important! When sharpened on a bench with abrasive with electrocorundum, control the temperature of the metal; if the steel overheats, the blade can change its physical properties.
Main types of whetstone
During the evolution of mankind, natural materials became available for sharpening knives, but at the beginning of civilization, the sharpening of blades was trusted to the primary sander.
At the same time, information from metal processing is structured and stone is selected, which may have less abrasive power.
Methods for working with them have been invented and developed. In addition, there are a wide range of synthetic materials, which are often subject to harsh authorities, and lower natural analogues.
Arkansas stone
Novacula is a sharpening stone for a razor. A solid siliceous rock made from similar crystals to quartz. The kind of stone is vibrated in quarries, the bars of Arkansas stone are crushed with a series of steps of granularity, are cut with an intense abrasive quality, and at the same time, through a strong structure, they are forced to harden when sharpened. ї.
Sharpening “dry” cuts off the pores of the stone with a saw and metal, as a result of which the stone comes out fine. The main disadvantage of these whetstones is the price and the unevenness of the blade when the blade is sharpened incorrectly.
Japanese water stone
The natural stone, originally from Japan, is of high quality, which sharpens, and at the same time finishes folding at the hardened point. Sharpening knives is a practical ritual. To replace the novoculette, this abrasive is soft.
Sharpening is carried out using stagnant water. The process itself is complicated and will take an hour. Stones with a grain size of 600 to 30,000 grit are produced according to the Japanese JIS classification; however, for super-finish wood processing, the total amount is 10,000 grit.
That's why 30,000 is already a world-class grain size for the swords of everyday quarrying. Before working, the block itself needs to be soaked in a container with water, after it has leaked, squeeze out and create a mud mass on its surface with the help of Naguro, another abrasive bar in the set of water stone.
With the help of this suspension, sharpening is carried out. The surface of the abrasive is rough and vibrates unevenly, which requires periodic updating with the help of special bars.
Synthetic stones
Diamond bars for sharpening, synthetic materials - electrocorundum, chromium oxide or diamond grit on silicate or ceramic base. These stones have a uniform structure, different grain size (consistent with the stone) and good performance characteristics.
The quality of such a stone is low, and the bars themselves are affordable. Sharpening can be carried out either dry, which is not recommended, or with water or oil.
Ceramics
These materials are cured for residual finishing, finishing or super-finishing. The grain size of these materials is small, but at the same time they are cheap and allow you to smooth out the abrasive marks that peel off, or to correct the base of the serrated sharpenings.
When the mixture becomes stiff, the fragments of the pores in the scorched ceramic become clogged, and the surface becomes smooth.
Widely widened sharpening stones of various shapes, such as standard whetstones, are processed with any sharpening stones on a stable surface, up to sharpening stones, for which the blade is adjusted on the go.
One thing is left unchanged, no matter what kind of bar or what kind of metal, but for sharp sharpening, bind with vicor oil: water or oil.
Sharpening rules
You need to prepare all the necessary materials right away. A whetstone for sharpening, a container with water, a paper towel or a paper towel. I will be in good hands and have a piece of gancherka.
It is immediately necessary to identify yourself from where you are confined. For example, 35 degrees is the optimal cut for a kitchen knife, or 40 for a hot sauce.
Look at the stone, if it has cinnamon or a sign of warping, then it should be straightened, otherwise the sharpening will be uneven.
The surface of the stone is treated with a different type of stone, similar types of stones, such as Japanese stones, are combined with a set of special comb stones to renew the surface.
Place the block on a flat, stable surface, and the surface will go smoothly. To minimize carpeting, place cloth or gum under it. You can fix it on the table in another convenient way. The top of the bar is wetted with water or oil.
The position of the blade can be adjusted manually, for example, by placing a paper clip on the back of the blade or inserting a coin. Since the power of a knife hurts your nerves and sharp eyes, you just have to adjust it to the required position.
The bottom is placed at 40-45 degrees to the axial line of the blade, sharpening is carried out by moving the handles of the blade towards you. For high-quality sharpening, the warto works in two ways.
The first time on a coarse-grained peeling block. Then, on the pre-age, granular grain. Before sharpening, it is necessary to periodically wet the surface of the stone. Inspection after sharpening is carried out visually, looking at the edges of the wood against the light; the edges of the wood are uniform throughout the entire day, and should not be visible.
You can also cut the paper on the vase. Imprisonment is less likely to occur without chains and without tearing the paper. The leaf is straight, without curls or tears. If the edge of the paper is torn, you need to repeat the finishing of the knife.
Visnovok
There are a lot of stones, but the skins from them have their own characteristics, and, like the bottom, fit the hand. Low-cost synthetic fireplaces. It is inexpensive to cut and wider.
If at the same time you can reach the sharpened softness, you can only use vicorite or natural stone, which has its own characteristics. Garni in terms of Japanese water stones. But the price is very high.
In addition, sharpening with such bars is difficult to achieve. Before that, you will need some attitude and skills. What kind of trace should I check in Arkansas?
This is a new product, leather stone is suitable only for its owner, if in nature you can fix the kitchen during a break between the series and read the newspaper, or rather take synthetics.
You can extract small amends, the sharpness of sharpening does not play a role here. Ale for the sharpness of the Myslivsky chi combat knife before going out into nature to quickly get to natural stones.
After sharpening the lower edges, the edges and shape are close to ideal. Since a knife provides a lot of time and warmth, it will definitely not fail you at the right moment.
Video
To sharpen a dangerous razor, synthetic stones are often used. These stones must carefully trim the shape, do not produce a clear suspension, the same grain, or the formation of thick breasts (agglomerates). The optimal size of the bar for sharpening unsafe razors is 50x150mm, often sizes around 60*180 and 70*200mm are available.
These characteristics are demonstrated by Japanese sharpening stones from cutting-edge makers (their series): Super Stone, Cerax / NewCerax,
It is extremely important to use stone brands HATAMOTO, NAKATOMI and Taidea for sharpening unsafe razors.
To correct the geometry of the razor, repair the edge and rough sharpening, use vikorist grain #400 to #600
Further sharpening begins in the following sequence:
#1000 ⇒ #3000 ⇒ #5000 or #6000 ⇒ #8000 ⇒ #10000 , and you can omit #8000 in this order
Often, when talking about sharpening razors, there are combinations #3000/1000 and combinations #3000/8000. Universal for both stainless steel and carbon steel razors, Super Stone works perfectly with traditional carbon steel razors.
It is often practiced to move from stones of 3000 grit to further finishing on natural abrasive stones: “Gusivskie” and other slates. These stones have long been valued for sharpening razors and were often called razors. If you want to lose the use of a synthetic abrasive stone when finishing the razor. The skin chooses its own methods of sharpening and finishing, the results and fluidity of the work, whichever is more powerful. I think that natural abrasive stones allow you to reach more than your hands on the lower parts.
Working in Arkansas and with a finished razor will rarely last long, so after Arkansas it is too aggressive and more suitable for knives.
The minimum set of stones for sharpening razors includes advanced grits #1000 ⇒ #3000 ⇒ #8000, then natural stone or #10000 - #12000
Edge after Naniwa Super Stone with increased X500, X2000, X3000
Don’t forget that stones for sharpening and finishing razors are of high quality, finishing stones and a uniform amount of hair. On the edges of the stones for sharpening unsafe razors, there is a sharp radius (about 1 mm) in order to avoid damaging the edge when the razor is applied to the stone and when the razor is removed from the stone. All it takes is a slight misalignment and due to the absence of a radius on the edge of the stone, you remove the microchip or replace it, which will appear larger, with a lower grain on which you work. This time you will have to turn back a couple of steps and work on coarse abrasives to straighten it out.
Gloriously gone are the days of today's careless razor
Few of our readers ask us - how can you sharpen a dangerous razor, how difficult is it, and what does it mean to sharpen this truly rare tool these days like sharpening a knife? This article has been updated with information on this topic.
Well, first of all, let’s talk about the basic technological methods of sharpening a razor – a few words about what the razor itself is, and what it means.
Until recently, the unsafe razor was the only tool of its kind, with the help of which even up to the mid-20th century a person could gain the ability to wear his face. With the active development of the cosmetology industry and the widespread expansion of safety razor blades, the safety razor is constantly moving out of the market, using too many positions. The mystique of wielding such a folding instrument at the same time as the mystique of sharpening it is becoming a thing of history and a waste of time. This may have been due to the accelerated pace of life in the marriage - if the daily person had no time to cut her shin and periodically sharpen her razor.
From these very beginnings, sharpening, and even more so - sharpening a careless razor - became their lot, a kind of desire and an element of the style of life - unpretentious, stylish and moderate. And, of course, knowing how to know how to properly handle a dangerous razor has greatly changed.
Anatomy of sharpening: skins, belts and stones
However, the sharpening of a dangerous razor is not at all the same as the sharpening of a regular knife - firstly due to the specifics of that delicate instrument. The razor's edge is characterized by sharply curved slopes that expand to the cutting edge in order to meet the leads in the thinnest blade. This design allows you to make the blade as sharp as possible, and at the same time shave hair more efficiently without damaging the skin. Moreover, if the knife can be sharpened slightly roughly, and the sharpener is sometimes ground on a stone with a grit of 1000 # - so the knife can be sharpened aggressively, with a good and sharp cut - then for an unsafe razor I will sharpen it this way the bath is unpleasant - aje smut here, unimportant on The name of the instrument is the safety of people.
It is clear that sharpening a dangerous razor can be done in three ways: sharpening on a stone, sharpening on a skin, and sharpening or straightening on a belt with various abrasives. Each of these methods has its own advantages and disadvantages. Sharpening on the skin is the simplest and cheapest method. You will need sandpaper of different grain size, water, a solid base and a surface to create a completely smooth surface. However, in stores today it is difficult to find skins of any grain size that would cost between 2,000 and 2,500 thousand. And for a fragile razor, such graininess is too small. Having sharpened the razor on the skin, it will no longer be brought to the belt.
Theoretically, the razor can be edited on any skinned velvety belt with the original GOI paste applied to it. However, it’s better, insanely, to quickly use belts that are specially sold for straightening razors. Working with the belt is simple and does not require any special skills, allowing you to smoothly trim the razor. However, professionals talk about those that are sharpened on a belt and are much less effective than sharpened on a stone. The wood will be less durable, and the cutting edge will be less durable. As a result, people who often sharpen their razor on a belt will have to do it regularly - once every 2-5 days, until the razor needs to be sharpened again on the skins.
The most reliable, correct and durable method of sharpening a dangerous razor is still sharpening on a stone. The only way to sharpen all the tools is to get them from sharpening shops, of which there are quite a few out of stock throughout Russia. However, this method is quick and difficult - it will require a lot of practice. For those who are just starting to get used to using a dangerous razor, the masters warn: the results of all your previous experiments will not be far off. And in just about an hour you will get a good hand.
In addition, the method of sharpening on stones is the most effective and simplest - it is also the most expensive, the fragments of bright stones today can be taken to the road, and for a complete sharpening cycle - such as to work out bluntly The razor is enough for a comfortable shaving and you will need the whole range of stones from time to time. 300#-400# to 10000#-12000#. Prote, you yourself allow yourself to reach the maximum possible with the razor.
Time to pick a stone: the basics of sharpening on a stone
Therefore, before sharpening the razor, it is necessary to use the cleanliness of the blade and the severity of the razor. If there is any color, it is necessary to remove it before sharpening.
Before you start sharpening your razor, be aware of one very important rule. The blade is first placed on the stone so that both the back and the cutting edge are exposed to the abrasive. It is very important for these reasons that in cutting the blade of a dangerous razor there is a blade with curved slopes - a kind of reversal lens - with parts that bulge, the very cutting edge and the back of the razor. Placing the blade flat on the stone guarantees constant sharpening along the entire edge and ensures maximum sharpness of the razor. If, before the hour of sharpening, apply an additional edge to the blade - either by hand or by sticking it on the back with a piece of electrical tape - you can seal the razor again, or hire it to be brought into such a position, if its correction can take longer and longer long time: for a shell of unneeded nakhila cob kut will be changed, it will become dull (and therefore less popular), and the error may lead to the destruction of the instrument.
We repeat once again: when sharpening the razor blade, the cutting edge is sharpened parallel to the back - so that the sword lies FLAT on the stone. A small coat at your own risk and risk can be set when sharpening a dangerous razor, unless it is a high-class professional, in order to save the marks or inscriptions on the backs of especially expensive models of a dangerous razor.
In addition, there is one more important point. The sharpening of the razor is uniform along the entire length of the cutting edge. That's why the professionals are glad to either cut stones, whose width suggests ancient forests, or sharpen them crosswise. During the hour of sharpening, do not drive the razor straight across the stone, but rather diagonally, so that the entire blade is covered in one stroke.
Let's go!
Once we are aware of these simple, but even more important, moments, we begin to sharpen the razor.
Sharpening a razor on a stone can be cleverly divided into three stages.
The first one is a robot with coarse-grained stones for sharpening the cutting edge, shaping the steel ball, and rough sharpening
The other is a gradual transition to a medium-sized, fine-grained stone, softer sharpened
The third stage is finishing, grinding on fine-grained stones, and also testing the sharpness of the razor.
At the first stage, when working with coarse-grained stones, it is permissible to drive the blade in both directions, so that both forward and backward will speed up the process of rough sharpening. However, be sure that when you change the abrasive to a new one, it is very important to remove the nicks that inevitably arise with such sharpening. Therefore, the remaining 20-40 rubles on the skin's rough stone may be too much in advance. Farther on, on medium and small stones, only the following technique is possible: driving flat along the stone with the climb forward, with the arms criss-crossing.
The same can be said about the pressure that is applied to a razor blade when sharpened. When sharpened on a rough stone, it may last longer. If you use a less rough stone (for a good abrasive wash), then it is less difficult to apply. I'm sorry, your efforts boil down to simply letting the tree lie on the stone under the moisture - and sometimes lift it lightly so that the ice touches the surface of the stone.
Before we talk about the area: It is necessary to carefully follow this, so that the stone on which you sharpen your razor, being as even as possible. There were no humps, depressions or abrasive cracks on any one. For this reason, it is necessary to carefully rinse the razor blade before changing the stone, and not to soak the stone in the same container - wasting large amounts of abrasive on a fine-grained stone can cause it to appear before Get rid of even dirty rags and seal all the sharpening points.
In addition, it is important to remember that the razor does not like sudden changes in grain size. Then, when changing the stone from coarse-grained to fine-grained, it is necessary to maintain such an interval so that the values of the grid on the stepping stone do not exceed the values of the front two. The smaller the transitions between the stones, the better the result you will achieve.
Controlling the sharpness: methods for checking the razor for sharpness
After completing the sharpening process, you need to check how well the blade is sharpened. Impeccably, visually, without conducting tests, it is therefore impossible. Therefore, one of the safest and most ostentatious changes is hair cutting. The test process is carried out as follows: The razor blade is fixed on the table with the cutting edge facing up. Then take a hair (either from the head or the body), and with a soft, soft hand bring it to the Republic of Kazakhstan. When the hair is trimmed evenly, it is impossible to use the usual curling saws. The hair may not touch the hair. If your hair has split into two parts, you can ensure that sharpening is complete and you have reached sufficient sharpness.
There is another test by which you can check the sharpness of the razor - running along the cutting edge with the pad of your thumb. However, for those who have not completed sharpening, this task can be traumatic and rarely pass without cuts. Therefore, we recommend that you beware of checking the sharpness of the razor in such a manner as you would like to do so.
Run out of food? Ask them in the comments before the article and we will happily respond to them!
Stones for sharpening are vicorized with a grit of 320, 600, 1500, unless sharpened until the shin is sharp, do not come out.
Judging from the stone at 1500 grit and the presence of a sharp edge, I assume that there will be either a very strong pressure on the stone or a Chinese grit.
If you have Chinese ADAEE stones or similar ones, they should be compared with the emery paper.
Tobto. The grain size for 320 is M45, 600 is M25, 1500 is M13.
As practice shows, the shank starts at M10-M7 on the hard joint and M7-M5 on the middle. And, of course, talents who can play on M14, but those stinking talents. This is about synthetics.
Can you tell me what contributes the most to sharpening to the point of sharpness, what is most useful in this regard?
Tick, squeeze and squeeze again. You can bend the edge on the thinnest abrasive.
Therefore, it is important not to overpress and remove the scuff. On the other hand, more often turn over those you sharpen, it’s not for nothing that our heroes sharpened the sharpening tables for an hour on the rotating mechanisms. Well, the third choice is the abrasive. On JiS200 – P3000 – F800 the blade should not be bare, the vice is adjustable. Well, of course, all your stones may be destroyed.
You can easily bathe stone with granularity, for example ACE 3000
How reasonable is it to talk about Chinese “ruby” ceramics? If this is so, then there is no doubt about it. This is sintered aluminum oxide. The abrasive is very cheap, as if you were looking for words "3000 ruby Sharpening" ", then you will have to pay up to 200 rubles for delivery, you must be amazed at the size so that it is 150*20*5. The whole problem is when you grind it in, the bars most often come out crooked. I spent three days on my first one, although I rubbed it on a simple river sand. Apply the mesh with a marker, the sheep will not help here. After removing the surface, finish with KK F600 powder. As a result, you select a bar that you and your children can grind, the wear on it is minimal, and the steel is in good condition. It’s difficult to call it the finish line, which comes after the finish line. However, I will finish the kitchen 50-55hrc on a new one, but if we are precise, then on another, which is ground in F1200 powder. Use it with Vaseline oil from the pharmacy, or preferably olive oil.
Paste is a special skin choice. Not intrusive, but if you need it, then only razors that can see the marks from stainless steel will polish out imperfections. Chromium oxide makes the metal “leak”, like jasper and baikalit, but free grain is never good. If you want a paste, then try aluminum oxide or polish on a hard polish (on the same “ruby” ceramic), if your hand learns to adjust the pressure, you can use a skin or a sling, or better yet, do not harm it.
