How to build a swimming pool with your own hands. We will make a swimming pool at the dacha with our own hands from available materials. A swimming pool from available materials.

I drink cold water. Once this has become a reality, you can build a small pool with your own hands. Songs of this type of design can be easily assembled independently in the yard of a dacha or at home. This article will help the ruler to please his family, requiring as much abuse as possible of those materials that are already obvious.

Types of pools

In order to know what to choose from, it is necessary to know about the peculiarities of various solutions and their relevance for specific minds.

Inflatable pools Such devices are installed in less than a year. The pool is made from PVC lining. To ensure that there are no leaks and the pool lasts for a long time, it should be reinforced with additional polyester fibers. There is only one part that is inflatable – the top edge. The whole scheme follows the principle of the floater. Water begins to accumulate in the middle, and the side drains. As you move the level of the wall, it becomes level and the full bowl is created. The kit includes a pump, filter, and similar assembly instructions. Among the positive features you can see:

• high speed of collection;
• Vaga is quite small;
• affordable price;
• the possibility of a loud throat in any minds (the harshness of the basis and zeal will be insufficient).

The inflatable pool is a perfect fit for all your needs. You should also know about the shortcomings: the high degree of contamination of water, the extremely crispness of the material (a heavy nail or a sharp object that has sunk in can damage the flooring, requiring you to have to replace it again). The price of such viruses cannot be called low; for each bottle you have to pay 30 thousand. rubles and more.

Frame. Among pools of this type there are obviously a large number of different solutions. The role of support can be played by metal tubes, which are assembled into a closed structure, and a PVC bag is placed in the middle. When the wine is filled with water, the walls rest against the counter and their extensions are separated. The shield frames are made from strong sheets of metal, which have an anti-corrosion coating that protects your dog. The interior space is organized in the same way as in the previous version.

It will take a whole day to install a frame pool. In this case, it will also require a garnet base, so as not to deform it with a lot of water. Seasonal tanks will have to be removed in the spring and reinstalled closer to summer. And those that can calmly overwinter. The additional rigidity ribs are installed, and the main pillars are of great size. This is necessary to repair the operation to deal with frozen water. It will cost you more money than inflatable analogues.

Zi sklovolokna. In most cases, this design has a ready-made extended capacity. Here you can set the parameters: depth and capacity. There is no need to guess anything. It is necessary to excavate the main pit, install a reservoir and provide the necessary communications. One advantage is the high value of the virus. For such displays, she turns over the concrete. Due to the power of the components, the bowl does not succumb to linear expansion due to temperature changes. This means that the term of service can be even more trivial if properly maintained. The glass fiber is easily repairable. The walls of the table are smooth, so that it is simply impossible for people to rub on them, which means that they are very easy to clean. There are a lot of additional equipment available, for example, you can buy different weights or trampolines for stripping. This will delight not only children, but also adults. The low level of thermal conductivity overcomes the rapid cooling of the heated medium.

With a polypropylene bowl. By itself, this polymer material is of sufficient value. You do not need an additional ball of waterproofing, which will cross the water drain. Most often, the preparation of such options is done in sheets. The stench is blue and black in color. You can make the folding one yourself, but for this you need singing instruments. Most often this is entrusted to professionals. The construction of all structures can take several days to complete. Such pools have a buried structure, which requires extensive soil excavation, as well as the laying of a concrete base slab. The material is resistant to ultraviolet radiation and chemically active substances. In this way you can calmly grow just the sky.

With a concrete base. To put it simply, the foundation pit is of sufficient length, width and depth, as chosen by the koristuvach. No one is afraid to fill it out of ruin. The walls and bottom can be laid with special ceramic tiles or mosaics. Such a project can be implemented practically in any person with a thyroid condition. For such a pool, it is important to think through all the necessary communications so that it can serve as long as possible.

Domes. This may be due to the overinsurance options. What is special is that all the stinks are present. It may be made from different materials. The main feature is that the bowl is closed from all sides, which prevents the wind from blowing, and also absorbs the hot water in the middle.

In addition to the differences in the mixing method, there are also options for the filtering option. These can be:

• Skimerni. In this case, water is taken from the pool through technological openings located on the side walls. Posing through the channels, it drains from the filter device. There they undergo cleaning, disinfection and frequent heating. The returned volume flows through the nozzles.
• Overflow. This method is more effective, but it is much more expensive in everyday life. The mirror of water reaches the very top of the pool. Water flows through the drainage hole on the top side and flows into a special chute, then into the tank. There is still a pump with a water sensor, which pumps the medium near the filter so that it cannot be cleaned. Go back through the opening that is located at the bottom of the pool.

Select location

In addition to choosing a pool and even before creating your chair, it is important to think about how to place it on your land plot. To make it easier to figure out this, there are a number of rules to follow:

Folding frame option

This option can be purchased even cheaper from ready-made ones. In order to implement this, you will need a beam of 100×100 mm, a cutting board of 100×30 mm or 50×30 mm. You will also need a material that provides waterproofing and is highly resistant to tearing.

• A plot is selected as described above.
• A pit is dug with a depth of 40 cm. The size of the basin is 20 cm larger than the size of the pool that is planned.
• The bottom is compacted well.
• A small hole is created in the middle, and a small hole with dimensions of 50x50 cm and a depth of 20 cm is dug. It will serve to collect water that may overflow over the edges.
• The entire expanse is filled with crushed stone of the middle and fractional fraction. The prosharok is guilty of becoming 20 cm.
• Sand is placed at another 20 cm. It is very important to tamp it down so that the pillow remains firm.
• The area is located behind the beacons. Make sure that the bowls of the pool do not become warped. The direct role can be played by metal pipes or wooden beams, which are laid in addition to the concrete level.
• From wooden beams, about which a little more was found, stands are prepared. Its thickness is such that it can be inserted through the skin meter. The final height of the pool is plus 50 cm, which must be buried in the ground.
• The part, once in the ground, is covered with additional bitumen mastic or burns into roofing material. In addition, it is necessary to cover the tree with an antiseptic coating so that rottenness does not appear due to the constant influx of water.
• At the site where the skin stopper is installed, a hole is dug to a depth of 50 cm.
• The racks are installed. The stench is determined by the help of a daily level at the horizontal and vertical plane.
• The area around them is filled with sand and soil so that it can be compacted well to securely fix the element.
• The diagonals are checked so that the design is symmetrical.
• The hairs stretch between the stacks. One is guilty of the buti below, the friend of the beast. They are necessary in order to facilitate the establishment of other reference points.
• Parts that are missing are installed according to the designated order.
• Behind the boards, the supporting walls are filled. It is better to move the elements together to create an even surface.
• After preparing the frame, a material is placed in the middle, which serves as a reservoir for water. This can be done using thick polyethylene molten material. It is important that it be in one piece, because... Leaks will appear at the seam site, and water will seep into the ground. The edges must be tanned through the top edge so that the material does not change during use.
• If it is a banana, then you can create a larger version. For this you need a PVC base, which is used for sewing awnings on shawls, eyelets, a riveter, a hair dryer and a gum roller. The blanks are laid in the middle of the frame and markings are carried out, as the hems will need to be cut along the hems, as it will be necessary to remove them for turning up, and the seam adhesion itself will be damaged. Around the leaves, they join each other for the help of a hot wind. The stinks are laid with a slight overlap. With the help of a hairdryer, heating is carried out until it is completely softened. Rolling a roller forms a solder joint. It is necessary to work on a level surface without touching the saw. The upper edge bends by 5 cm. Eyelets are installed behind the riveter. The distance between them is 15 cm. Fixation of the awning can be extended to the inner part. To do this, simply press the screw and washer onto the wooden base. Otherwise, the edge is folded over the top cord, then a skein is pulled through the eyelets and it is used to prepare the element.
• The finished pool will be filled with water.

To make the structure easier to fit into the wider interior, it can often be completely embedded in a pit. In this case, the bottom is organized exactly as described. The drainage system can be completed. For this purpose, which is located in the middle, a sewer pipe is supplied, the other end of which comes out at the water reservoir or channel. In this way, the water will be more abundant.

Preparing the concrete pool

The main task of this option will be to carry out earthworks. Having identified the place and identified the territory, a hole of necessary depth is dug. The bottom is formed according to the recommendation, if the food has been overcooked.

Installation of a swimming pool made of polypropylene

Due to the obviousness of the singing skills, installing such a pool will not take many hours. We need sheet polypropylene (wall thickness 8 mm), material for pressing, a technical hair dryer, and a plane.

To install such a structure, a pit is prepared, the size of which will be larger than the hole itself by 10 cm from the skin side. Fill the bottom with rosemary and vistoyan. The vessel is sealed in the middle. In the space between the walls of the vessel and pit, gravel is poured and compacted well.

The technology for producing a polypropylene pool is shown below:

Filtering system

The pool filter is an invisible device that is always present. Without it, it is impossible to drain the water for three hours. It is necessary to carry out partial replacement. The device can be installed either in a swimming pool or in a specially prepared place. There are obviously a large number of ready-made options. For a small pool there is no need to tighten the filter too much. You can pick it up yourself for the fruit. For this you need a 100 liter plastic barrel. The main concern will be the appearance of the lid, which can be hermetically sealed. You will need a central or drainage pump, plastic pipes, fittings and a filter cartridge.

• Below the throat of the container, drill the opening.
• A threaded nipple is inserted into the hole. The rubber bands are tightened on both sides and the locknuts are screwed on.
• This outlet should be 5 cm higher than the bottom diagonally.
• Before the upper adapter there is a pipe connection that allows water to be drawn from the pool.
• The filter cartridge is placed on the bottom from the inside. A pump is connected from outside. The pump must be removed from the pool.
• Great sand pours halfway into the barrel and then sifts through.
• The installation is responsible for the amount of water in the pool. The river will be put into storage by self-fuel. Passing through the sand, cleanse yourself and use the pump to move back to the bowl.

With the right approach, there will be more than one river to the right of the pool. A concrete or polypropylene structure can easily be built in a manhole or basement. However, it is necessary to plan this at the stage of everyday life in order to eliminate unwanted influences from uneven influence.

Video

Below you will see a video tutorial on how to build a concrete pool:

Photo

Who doesn’t want to splash around and cool off in their pool on a sunny summer day? How much joy and endless satisfaction the gift brought to the water-mature rulers and to the non-Gamovic growing generation. Realize yourself, which is why the “rainbow” world is completely meaningful.

For those who want to install a swimming pool at their dacha with their own hands, we recognize the low practicality of the methods of its organization. Here you will find out how to create a timely and inpatient option. You can figure out which method is easier to implement especially for you, and which is most pleasant for the price and method of arrangement.

This article has clear information about all the foods you need to know. The report covers everyday life technologies. Valuable recommendations are given for choosing the right place for the pool, choosing the optimal type of material for constructing the bowl, waterproofing and finishing.

The activity of a country pool can be achieved by a little misunderstood master. It is necessary to follow the technology for constructing the finished structure.

First of all, you need to choose a suitable place for a swimming vessel of the same type. Not only will you be able to handle a large body of water for swimming at long distances or cutting from a three-meter springboard.

Building a swimming pool to give warmth to a house with a bathing area for a whole river is expensive and foldable, a possible option with light covers made of polycarbonate

Structurally, pool baths can be customized:

• Because of the buried soil. The bowl of the pools is installed at the pit, it can be ceramic, plastic, monolithic concrete, made of foam blocks or purpose.
• Installed on the surface. These are available for time-based vikoristan, there are frame (assembled-unassembled) and inflatable ones. For their installation, it will be necessary to thoroughly compact or fill the maidan with concrete.

The shape of the stink bowl can be round, rectangular, oval or folding geometry. The simplest option is to have a swimming pool in front of a large barrel. It would be difficult to call such a thing a full-fledged pool.

For control at the dacha, most often choose an indoor pool from a stationary or mobile one.

Offering options through the availability of dahu vikoristovovat for the reasons will be given only inflow, but for a summer residence on the output of these structures, they will be completely finished. Their devices do not require very serious investments and are simply used for self-wiping.

It’s much easier to create a closed pool with your own hands. For this purpose, it will be necessary to draw up a full-fledged project that will likely arrive at the dacha with the laying of pipelines, installation of equipment and burning.

If the plot is not protected and the rulers rarely pay for the dacha, then it is irrational to start such a dispute.

Inflatable structures are inexpensive and can be easily installed, but if there is any sharp object, they can easily be converted into a useless tinkering

To finish the walls and bottom of the bowl of a stationary pool in the middle, the following is done:

1. Sklovolokno.
2. Polypropylene.
3. PVC molding.
4. Mosaic or tiles.

The mixture of polyvinyl chloride melts in both framed and monolithic spores. And the choice of materials is limited to the installation of stationary structures with frequent or complete sinking to the ground.

If the sides turn out to be uneven, they will have to be plastered with cured reinforcing mesh. You can use metal, but it would be better to choose a composite made from polymer materials. Remaining will be more expensive, and in the face of flooding, it will definitely not be worse than rusting.

Without a mesh, the ball of plaster that is victorious cannot be washed out for a long time in the spores. The energy of the blows of a person who spills will inevitably be quickly destroyed.

You can light up the illuminated bowl of your country pool:

• mosaic;
• PVC melt;
• kahlem.

A decorative ball can not only decorate the pool surface, but also reliably protect the concrete from water.

If at this stage you cheat and make mistakes, then the concrete pool will immediately have to be completely repaired. For a number of leaks, you will need to completely dismantle the sealed structure, and then re-fill everything.

The sides and bottom of a monolithic swimming pool can be formed without hardening the formwork using the concrete slab method, which requires the use of advanced skills and special equipment.

The easiest way to decorate a PVC bowl is with spit. All you need to do is spread it out and spread it out, and then solder the edges of the clappers into one hermetically sealed sheet. At gatherings, be sure to twist the melt with a ribbed surface, otherwise the stench will come out too slimy.

The use of decorative tile materials allows you to create a country pool that is more attractive in appearance. However, doing this with your own hands is much easier. And it is very important to use only waterproof brands of glue, and only use antifungal additives for the adhesive.

Option #3 – with wooden shields

To prepare a wooden pool at the dacha, you need 60x60 mm bars and planed planks 30 mm in diameter. The design is in the form of an eight-piece. To make the cob, you need to beat all the curls at the bottom of the bowl.

All wood may be treated with antiseptics, otherwise a pool of lumber will have to be used again several times over the summer.

The pool tree can often be buried in the ground or simply placed on the ground. The bottom of the first fall is more beautiful than the visconati, following the classical scheme of digging a shallow pit, laying reinforcement and pouring concrete. And in another you will be able to get by with thickly beaten bones.

After assembling all the shields into a single structure, the necessary technological openings are installed in them. Then PVC sheeting is laid on the surface for waterproofing. Once the work is completed, all you have to do is install the ramp and refine the upper edge of the sides.

In addition to three options, a country pool can be constructed using either expanded polystyrene blocks with concrete poured in the middle, as well as plastic splashes or large-sized covers. In order to get a lot of money, choose to stay in line with the Lord's financial capabilities.

How can you create an area near the pool?

The head in the design of a swimming pool at the dacha is the contours and rim of the bowl. Folding forms with wigs will always turn your attention back.

And so that the pool visually looks dark, in fact, its inner surface should be made white. In this case, the adjacent area must be painted in dark brown shades.

The frame pool, which rises above the ground, with a small maidan, the order in the well-groomed garden does not look as cumbersome as it does in the open garden

To decorate the area adjacent to the bathing area, place garden figurines and flowerpots. Vysadzhuvat all decorative growths directly into the pool, as a result of a piece rate, it is strictly fenced.

The swimming pool in the courtyard of the estate's cottage or cottage is associated with the abundance and abundance of power. This is often the case, unless you allow yourself a place for bathing, even if you are a person who can live in a small plot.

For which you will need a minimal penny investment, available materials, spare time and a simple tool, which is what most summer residents have. How to build a swimming pool with your own hands - read our article.

What materials at hand can be used as materials for the preparation

Speaking about the materials at hand, we take into account materials that can be easily obtained without spending large sums of money. In this case, the final result, in addition to its external appearance, differs little from ready-made viruses.

Stara Pokrishka

An old tire from the great modern technology of the country is an inexpensive material for constructing a small pool. It is best to choose a combine tire with a diameter of 30-32 inches. This size is enough to furnish a swimming pool for one adult person or two children.

To find a tire that fits the size of the tire, go to a tire shop and sell it for a small fee. It is not uncommon for great tires to be sold second-hand on the Internet.

Residents of large cities can go to the warehouse, old tires are transported to factories for further processing.

The average advantage of the tire pool can be defined as:

• the width of the oversized tires allows for the use of material for joining the walls of the pool;
• the rounded shape of the tire is ideal for creating a water container;
• The special inner frame of the tire reliably removes water;
• gum, which stagnates when prepared, is not afraid of sudden changes and sub-zero temperatures;
• the total amount of materials that are spent for the preparation of materials is much lower than when purchasing a finished structure;
• A pool made from tires can be easily decorated with additional furniture.

The main part of such a pool is a terrible construction that can only be built for one maximum of two adult people. No one will be able to fully swim and bird.

In fact, a swimming pool is like a swimming pool in which you can enjoy and lie down in comfort after a busy day at work.

Wooden pallets

Wooden pallets are black plank flooring on a support, which is stacked for folding dry bags in bags. The pallet has a hand-made design and shape that is suitable for creating supporting walls for the pool.

The pallets are piled up in a vertical position, forming the frame of a large pool. The more trays there are, the larger the water container will be.

For a medium-sized pool, there will be enough trays in the amount of 9-11 pieces. This can easily be stretched for 3-4 people.

Before the pool is ready for use, it is necessary to carry the following from the pallets:

• the height of the pallet makes it possible to install a large-capacity pool;
• ease of installation and fastening of chutes, chutes, weights for lowering water;
• there is no need to dig a deep pit for the foundation;
• easy to dismantle and move to a new location;
• if necessary, it can be quickly repaired or expanded by adding one or two sections.

Among the shortcomings of such a pool can be called underground instability. It is necessary to replace the tightening belts and supports to improve the structure, which need to be checked and tightened before the skin inflow of water.

To protect against the influx of moisture and natural litter, remove the wood from the outside, with further treatment of all wooden elements with an antiseptic.

Gabioni

Gabion is a structure that is made from fine mesh. Previously, similar plants were used to enhance river banks, preventing them from eroding. In everyday life and gardening, it is necessary to create large-sized viruses of various shapes.

When the pool is built, it is ideal for forming walls. To fill the forms from the mesh, it is best to use a dry stone of different sizes.

The advantages of such a pool include:

• gabions allow you to create a space of any shape: colo, oval, square, rectangular;
• solidity and value of the design;
• simple robotic technology that allows you to create a pool of any size;
• original, modern look that does not require additional processing.

The amount of labor spent on cleaning the pool is high, so it is necessary to find a sufficient quantity of stone and deliver it to the place where the work is carried out. Dismantling another weak part of the structure, since it takes a lot of hours to disassemble the pool.

Plastic bottles

Plastic containers are constantly being used for creating summer houses and transporting water in the village. Ale and її can be vicorized and frozen to improve the pool.

The essence of the method is that the plastic sheet is placed on a cement surface, forming the walls of the existing pool. Before the seam is laid, the space between the patches will be filled with cement, which will provide sufficient strength and tightness to the future structure.

In this form, the containers are stored only in the amount of containers that can be found. This method has a major disadvantage, since it requires preparation of the material.

Because it is possible, you can add containers in bulk. The average large pool has no more than 2.5-3 thousand. rubles, not including the amount spent on cement and concrete.

Concrete ring

Concrete rings are assembled to reinforce the walls of the well shaft and sewerage system. The standard dimensions of the reinforced concrete ring must be kept in the marking process. For example, the vibrobi with markings KS-15-9 has a height of 90 cm and a diameter of 150 cm.

The optimal dimensions of well rings for building a swimming pool can be seen in the table below. Create a ring with a bottom that is already prepared to simplify the process of building the pool, as long as you don’t have to pour the concrete base.

The benefits of such a pool include its value and durability. Concrete walls do not need to be compacted and coated with dry storage. The width and depth of the cut container should be completely washed for bathing 2-3 adult people.

The only downside is that in order to deliver the meat to the dacha, you need to arrange large-sized transport. To renovate and transfer to the place of retouching the pool, a faucet is installed, which is also visible on the side of the faucet.

Metal container

Large containers made of metal are stacked for transportation by salvage tracks or by ship. You can find them at metal production points, where leaky containers are often delivered.

Such a container is good for a swimming pool - you only need to weld the cracks until they have settled. The capacity of the container depends on the size of the size of the pool.

As with a well ring, it is necessary to arrange special equipment for delivery, dismantling and transferring the container not far from the prepared place. Otherwise, the container is practically similar to the prepared plastic pools. It is also necessary to carry out minor cosmetic repairs and anti-corrosion treatment.

In the middle, the space is covered with waterproof tarpaulin or covered with some kind of tile.

Preparation and development of the structure

An old tire and wooden pallet are the most readily available materials for building a pool with your own hands. Based on this, we will carry out a breakdown of the capacity depending on the overall dimensions and the number of pallets.

As a wheel tire, it is better to wear a tire for the BelAZ model FT-116AM2 or FT-117M2. These are large-sized tires with a width of 955 mm and a diameter of over 3000 mm.

Other models and their sizes can be found in the table in the photo below.

For the expansion of the current pool, the speed is determined by a simple formula: V = π * r 2 * h, where V is the capacity of the cylinder, π is the value (3.14), r is the radius of the stake, h is the width of the tire.

We will carry out a refurbishment for the FT-117M2 tire, the width of which is the same as 1175 mm, and the diameter is the same as 3575 mm. The thickness of the clay-concrete pillow is 30 cm.

The sequence of breakdowns is as follows:

1. Based on the output data, the radius of the tire is more modern: 3575/2 = 1.7875 mm.
2. We present the data to the formula and calculate the construction costs: 3.14 * 1.7875 2 * 1.175 = 13.1899 or 13.19 m 3.
3. Similar steps for calculating sand and cement: 3.14 * 1.7875 2 * 0.15 = 1.6838 or 1.68 m 3.

Other materials are selected individually for the taste of the design project, as it has developed in the past.

Wooden pallets are prepared according to GOST and measure 800×1200 mm. Knowing the dimensions of the tray, you can calculate the volume of the pool of any shape. We recommended that you use 9 pallets, then we will carry out the expansion for the pool in the shape of a nine-bedroom.

For this purpose, the standard formula for volumetric expansion is: V - S about * h, where S about is the base area, and h is the height of the pallet. Formula for the area of ​​the nine-cut square: S o = 6.18182 * a 2 de a - the side of the nine-cut square, which in our case is the same height as the pallet.

The sequence of divisions is in this order:

1. Let's calculate the area of ​​the base: 6.18182*1.2 2 = 14.8363.
2. Pool volume: 14.8363*0.8 = 11.869 m3.

If the pallets vary in height, then replace 1.2 m in the first formula with 0.8 m. The same applies to the other formula. At this point, the pool becomes deeper, but slightly changes in diameter.

The tool is ready

To repair the pool from the old tires you will need the following tools:

• Gostry nizh iz mіtsnym lezom.
• A shovel and a spade.
• Capacity for mixing cement-butter mixture.
• Use a stand mixer or drill using a stand-alone attachment.
• Roulette and bulbashkovy rhubarb.

For large-volume mixing, it is faster to use a concrete mixer. It is important to speed up the process of conquest.

To operate a pool with pallets you will need the following:

• Hammer and screwdriver.
• A jigsaw, a plane and a sanding machine.
• Pliers, self-tapping screws and screws.
• A shovel and a spade.
• Containers for sand, cement and water.
• Roulette, kosinets and olives.

The jigsaw can be replaced with a basic hacksaw, and the sander can be replaced with an emery paper. There is little impact on the overall result.

How to make a swimming pool from a tire

Before the war begins, the first clearing of the plot is carried out. It is necessary to collect old leaves, shoots, uproot bushes that are sprouting, etc. To move the tire to the site, you will need the help of a partner.

Sequence of splicing the pool from the big tire:

1. We turn the tire on its side. Using a knife, you need to cut the side of the meat along the stake. When tightening, the track is oriented towards the markings on the tire. This simplifies the cutting process and allows you to cut the cut with a smooth edge. It is not recommended to use an angle grinder, because the gum will quickly turn into a crust and stick to the disk.
2. Next comes the preparation of the area until the finished flooring is finished. You can earn money in two ways. In the first fall, a ball of soil is formed to a depth of up to 25-30 cm. The base area is slightly larger than the diameter of the tire. Carefully mix the bases and mix the fine-grained sand. The thickness of the ball is 15 cm. Then lightly mix the sand with a small amount of water and compact it with a shovel.
3. For the other type, there is no need to vikopuvate the deadening. It is enough to level the plot of earth well so that the sand will settle. Further compaction technology is similar. We recommend that you use the first method as quickly as possible, since this method is congealed to create a stronger base and allows you to create a larger base.
4. To compact the sand, you need to pour a ball of concrete at a depth of at least 15 cm. When mixing independently, the proportion of cement to sand is 1:3. The thickness of the water affects the strength of the installation and the division.
5. In the meantime, it is necessary to transfer the cover to the pouring area. Once installed, the tire is slightly pressed in at the edges. When the concrete gap and tire are empty, pour another 2-3 gallons of sumisha.
6. You can start decorating the pool and check for dry sums. After 14 db, the concrete ball will gain 80% of its value. Outside drying of concrete is provided with a stretch of 25-28 dib.

To decorate such a pool, a lining for external work, decorative stone, and pieces of tiles are used. Before pouring water, cover the inner surface of the tire with a water-resistant coating.

Plastering a swimming pool with plastic splash pads

In addition to cement and sand for building a swimming pool with splashes, you need to prepare wooden planks, small blocks and gravel. The size of the bar is 25×50 mm. Gravel fraction – 5/20. Every day you need to renew the foundations where the gravel pillow will be placed.

The sequence of actions to quickly create the pool from the dances is:

1. The selected plot should be cleaned from the soap and water. Next, you need to remove the top ball of turf and dig the pit to a depth of 30 cm. The dimensions of the pit will be larger by 20-30 cm on each side. For example, for a swimming pool with three-meter sides, a pit measuring 330x330 cm is suitable.
2. The formwork is being installed. For this purpose, place the trace at the end for additional juice. The block is nailed to the board through a skin of 100-120 cm. To fasten the boards to the frame, a metal furniture roll is twisted. For example, let’s go to a small piece of 40*40*16 markings.
3. The formwork is installed at the excavation pit. The base of the excavated gravel is leveled and easily compacted. For consumption, the land can be treated with an antiseptic for the poverty of the Buryans. After this, fill the ball with sand and gravel 12-15 cm thick.
4. If there is no gravel, then it is necessary to lay a reinforcing mesh collected from the reinforcement rods. For this rod, you need to get involved in an additional emergency dart. The frame is installed so that the reinforcement does not stick into the sand. It is allowed to install stones or stones at the back of the installations.
5. Before pouring the concrete, the slid should be poured over the mixture to remove the liquid from the opening. It’s better to use a ready-made virib for drinking water. The pipe is attached to the fittings. During the pouring process, it is necessary to correct the top surface.
6. Concrete pouring is being carried out.

   In this case it is better to use concrete mixers faster, since large structures require 1.5-2 m3 of concrete. During the pouring process, the concrete is reinforced with a wooden lath or shovel.

7. After pouring the base, mark at least 14–18 dibs and then proceed to laying the walls of the pool. For laying, you need to pull the mooring cord, fixing it on the stands or any other material. The thread is stretched around the perimeter of the pool.
8. Cement-sealing structures are laid behind the tensioned guideline. Plastic containers filled with sand are placed on the fresh surface. The dances are tied together with a 3 mm webbing. The process is similar to laying a target. Laying the first row is difficult until the base of all several walls is not completed. After this, move on to the laying of another and advancing rows. The optimal height of the wall is 100–150 cm.

After completing the work, it is necessary to clean the inner part of the pool. For this purpose, all crevices and empty ones are coated with cement mixture until a smooth surface is formed. If the cement ball is larger than 3 cm, then it is better to use a reinforced mesh to attach it to the bottom of the ball with the help of screws.

In a similar way, the front side of the walls of the pool is created. As a dry-decorative coating for interior walls, waterproof paint for swimming pools is applied with a roller onto 1-2 balls. After filling the track, check at least 5 dib.

Instructions for creating a swimming pool with pallets with your own hands

To build a pool from trays, you will need to add a wood antiseptic, PVC melt and a drain pipe of any hand-made form.

The process of cleaning such a pool consists of the following stages:

1. Wooden pallets need to be treated with an antiseptic or antifungal agent 1-2 times.
2. In order to shape the pool, it is necessary to dig a hole with a depth of 30 cm. We carried out excavations for the pool with 9 pallets, then the hole was made in a round shape. The size is due to the slightly larger diameter of the pool itself.
3. Add gravel to the bottom with a fraction of 5/20 and distribute evenly over the surface. Tovshchina ball three times more than 20 div. Next, the frame of the future container is assembled in the middle of the pit. The pallets are mounted with plank flooring in the middle. To connect, metal pieces, boards and screws are used.
4. The outlet of the drain pipe is marked. For this purpose, there is an opening in the frame through which a pipe is drawn. After this, it is necessary to tighten the structure using 2-3 tension belts.
5. Wooden wedges made from bars are driven into the stake through 30-50 cm of skin. It is possible to further refine the design. A 10-15 cm thick concrete sack is poured into the ball. For verification, a rule is used.
6. The concrete ball will dry out in 25-28 days, but further work can be removed within 10-14 days from the moment of pouring. To cover the inner surface, PVC molding is applied and secured to the top of the pallet.

The lining of the pool can be done using particle boards or moisture-resistant plywood.

On a hot summer day, it is important to encourage yourself to cool off in a cold body of water. Not everyone builds a small house on a birch river or lake, and building a permanent pool will require space, time, and material costs.

What is the alternative to capital expensive dispute? Fortunately, the people's compassion has not faded away and the food supply has not faded. We have selected not just the simplest ideas, but also the best ones that can actually be implemented in the garden without special skills.

The presented structures are not insured according to the 10-river system, they do not comply with all the standards of the everyday life of swimming pools. But the authors put a completely different label: cheap, fast, seasonal. Still, it is necessary to follow the rules and in such everyday life, we must first become aware of the hidden recommendations.

Important points when planning and maintaining a swimming pool

Regardless of the choice of material for creating a seasonal pool, we recommend paying attention to the following points:

• The location for the pool should be under direct sunlight, and not in the garden: the water will warm up faster and there will be less smudges from the appearance of falling leaves and clods;
• the plot must be leveled and compacted;
• the bottom and walls of the self-made bowl, the innocent mother, were hot and harsh on the surface;
• It is necessary to immediately think about how and where the water is discharged during regular replacement (especially if the installation of filters is not transferred);
• the frame needs to be strengthened so that the structure does not fall apart under the pressure of water;
• When purchasing waterproofing sheeting (tarpaulin), cover the size of the container with a margin of 50 cm around the entire perimeter.

When gentrifying a budget pool, it’s important not to forget about cultivating the territory. Along the perimeter you can create a wall of pebbles or river sand, decorate the approach with a terrace board, or simply beat up wooden flooring from old pallets. It is also important to consider a hanger for towels for comfort.

Just dig the hole and cover it with spit

The first stage is the most laborious - digging of the same size and depth. Once the pit is ready: the bottom is leveled and compacted, the walls are perpendicular to the bottom and are not sagging, proceed to another stage - preparing the surface.

Lay cut cardboard boxes on the bottom so that you can tread lightly. The walls are covered with sacks so that the melt does not tear due to the unevenness of the roots.

At the third stage, the pit is covered with waterproofing lining. The upper edge is pressed against stones, which additionally plays a role in decoration.

At the bottom, you can bury a bowl made of available materials, covered in the middle with lining. This is a great opportunity to increase the depth of the basin. If fragments of the edge of the bowl protrude above the surface of the ground, then the earth will not be washed away by the water.

We sing that the idea of ​​​​the visibility of the pool hits your soul. And before the coming season, you will not want to spoil the watch designs. Optimal solutions will be adopted in the future. To ensure a private pool, it’s best to contact professionals who can help you at all stages of your project. The company “POSEIDONBUD” has already produced a lot of good videos. They can create a pool for your needs or use them for the implementation of typical projects.

Frame pool made from pallets

Select a flat plot and cover it with a thin tarpaulin (perhaps an old banner or canopy). Next, take 9 pallets and fasten them together with self-tapping screws and slats. Place the pallets on edge, joining them in a ring. Once the round frame is ready, it is secured with straps for additional rigidity.

At the beginning stage, the inner surface of the “bowl” is covered with thick greenhouse lining, and old towels, bedspreads or carpets are placed on the bottom. Make sure to soften the surface so that at the time of bathing you can comfortably press against the drains and walk on the bottom.

The final ball is a hydroisolating plaster. As soon as there is a blue or blue color, the water by the pool will always be bright. It is advisable to use black pilaf to improve the heating of the water. It is important that under the melt there are no hot, sharp pieces of wood, boards that protrude, or a rough surface that could cause the melt to tear.

The melt is secured to the upper edge of the pallets using a special sticky stitch. For decorative finishing of the outer side of the pool, you can use vicor or bamboo. Place narrow pallets on top.

The frame can be made straight, connecting pallets under a straight cut. The bottom can be lined with pallets.

To create the most comfortable zone, you can attach a stand to the cot for lighting and create a tray from the trays.

Fill the pool with tap water from a garden hose and drain it manually or using a low-pressure pump. If the chemicals are not stagnant to prevent contamination, then you can safely water the sheep beds and flower beds with water.

Pool with old boxes

The frame for the pool can be made from old wooden or plastic boxes. Fold them into a straight-cut box, squeeze the skins together and additionally wrap them around the perimeter with a plastic stitch.

The structure is assembled on a tarpaulin. The middle of the box is covered with thick waterproofing lining, pressing the upper edge with wooden planks.

Pond from Sina - simple and cool

Delightful handy materials for creating a swimming pool in the dacha sector have attracted a great deal of respect for hay, which is an indispensable attribute of rural lands.

It will be laid out on a prepared platform, and the sides will be made from straight-cut compressed packages. Then everything follows the diagram already shown: thick plait is laid in the removed bowl, the structure is fastened with belts. To protect the waterproofing material from being damaged by a first ball, you can place cardboard or a thick tarpaulin on the hay.

Pool on a metal frame

For those who are involved in welding, it is not important to prepare a simple pool with your own hands from metal.

The skin wall is prepared from a profile pipe and a galvanized sheet. The structure can be assembled using additional welding or can be assembled using bolts.

A liner with a hydroisolating lining is installed in the middle, which, when installed, can be used to negotiate the dimensions of the resulting structure. You can build such a pool using additional flooring and pallets, and also prepare a cover.

To increase the level of ease of operation, during regular cleaning it is recommended to install a pump with a filter and stop the disinfectant agents. Because your pool will not turn into a swamp within a few days, the water must be regularly pumped out and replaced with new water.

Mini-pool from the great tire

To complete our selection is a very simple idea of ​​preparing water from large-diameter tires using important special equipment.

To expand the tire pool, we first need to cut the sidewalls of the tire. Once the workpiece is removed, a concrete platform is placed in front of the preparation and filled with concrete. In this way, the tire and concrete create a bowl, so that after drying the concrete in the middle must be coated with a special mixture.

As a result, you take away little and no effort, but then do not require much effort in a well-maintained and even still water reservoir, which will help you freshen up on sunny days.

The most accessible and favorite variety of repairs is the same as those for the dacha. In this genteel, gentrified space it is so nice to relax, catch up with loved ones and friends, enjoy the evening and spend an hour on your own. Therefore, it is important to create a dacha plot that is handy, comfortable and suitable for complete repairs.

We won’t ask for a swimming pool at the dacha. Although many people are convinced of this luxurious element, it is important that it will be quite expensive. But it’s not at all like that, but it’s actually possible to build a swimming pool with your own hands at your dacha! And you can also decorate your dacha plot with a small fountain. These are simple tips to help you master the basic types of work necessary for everyday life in the pool. There are a lot of ways and techniques for keeping a swimming pool alive. We recognize you as the most demanding and willing for independent implementation.

Pokrokov's diagram of the everyday life of a monolithic swimming pool

The development of the basin requires a step-by-step completion of the offensive stages:

• development of the plan, preparation of the chair;
• domestic drainage, thermal insulation;
• strength;
• laying out communications;
• pouring rose;
• waterproofing, sealing;
• loving robots.

Our instructions will help you quickly and easily create a swimming pool at your dacha with your own hands. At the initial stage, it is important to decide where you want to organize the water supply. In this case, it is important to take into account not only the power of the land, but also the ability of the plot and its particularity. In order to make the right choice, it is necessary to put together a plot plan with all the details and analyze it. A number of parameters will help you choose two or three places for the pool.

It is important that the territory be protected from the great growths and trees. In an open place, the water gets hotter faster, and in the shade it stays cold for a long time. Also, the roots of trees can cause the bowl to collapse, and leaves, grass, etc. can cause a lot of problems. All you have to do is swim steadily from the water.

Properly cover the clay pool. An adult person can swim comfortably at a depth of at least 1.5 m. If there is less water, the pool will be ideal for children. In deep water pools, it is necessary to add 1.5 m for drainage and strengthen the thickness of the concrete walls of the bowl.

No less important than nutrition is communication. It is important not to seal them during the pit preparation process. Before the cob starts working, it is necessary to determine whether it has been laid. After all the preparatory work has been completed, you can proceed directly to the earthworks. When digging a pit, ensure that the walls are not damaged. It may become close to 5º. This nuance will save you from problems with the soil, which is gradually drying up.

The task has come, when it is necessary to build a swimming pool with your own hands at the dacha - using a waterproofing device. The first stage of construction is the creation of a fifteen-centimeter sand-crushed stone “pillow”. It may be compacted and varnished. Ruberoid is placed on top of the pillow. Right now there’s one ball, and then there’s another one. The edges of the leaves must rise above the ground no less than 20 cm.

The offensive stage is stronger. It is connected to the additional reinforcement frame. You will need material 20 mm in diameter. After the frame is ready and laid, the pit is filled with concrete.

The best option for pouring is to pour the entire bowl at once, without filling the balls. It is not so easy to earn money, especially since self-exertion is involved.

Therefore, as a rule, this stage is divided into several stages. We should fill the bottom first. In this case, it is important to deprive a small injury from the b_k zlivu. After the bottom, prepare the walls.

To achieve high filling depth, it is recommended to use vibrating units. While the soil is drying out, you can start laying communications.

Once the bottom is reached, work begins with the walls. For this purpose it is necessary to create formwork. Make sure that the concrete wall of the pool is at least 40 cm thick. If you fill the fill in two stages, then the reinforcement will also be completed in the same order. After you have built and installed the formwork, you need to prepare a frame that will connect to the horizontal parts. Now you can pour the concrete. This also requires additional vibration installation. After you are caught, you can cancel your health care work.

Do you want to know how to build a swimming pool at your dacha with your own hands inexpensively? The video on this page will help you understand the basic principles and methods of learning all the necessary robots. Read our descriptions, admire the photos and videos, and you can create a pool for your world at your dacha. For example, a luxurious rich swimming pool.

In this section you will find report recommendations for the skin stage of everyday life in a rich swimming pool without complex communications. For someone, the bowl is simply filled with water, and after about an hour it is drained, the bowl is filled with fresh, clean water.

We first need to choose a place. Then it is necessary to carefully think through each stage of the work, to evaluate the reality of conquest in a specific place. Then an optimal plan is developed that will allow you to purchase everything you need with maximum savings and efficiency. After this, you can proceed to the foundation pit.

Since a large structure is planned, it is necessary to expand the size of the skin area. During the excavation process, the foundation pit is tapped and poured one by one. In this way you will reach the bottom. After hardening, you can do a test run of water to see if it leaks. If there are no defects, the water needs to be pumped out. Then, you can pour concrete for your special needs.

This is one of the simplest and most accessible ways to create a swimming pool at your dacha with your own hands. In this case, you will not need to bother with sewerage, wastewater and other communications. Such a pool will not require cleaning devices. A simple, comfortable and economical pool, which not only allows you to enjoy the cold water, but also serves as a wonderful decoration for the plot.

Polypropylene is a modern and practical material that is ideal for building a swimming pool. Among its characteristics are high value, resistance to temperature changes, reliability and ease of maintenance.

If you have decided to build a polypropylene pool, then you will need to determine the needs for a new place. The selected area needs to be marked so that you can properly dig the hole. It is recommended to leave a space about a meter wide so that you can walk around the pool manually, as well as remove any work from pipes and other communications.

Know what height the board is reachable. It is necessary to dig about half a meter deeper, then remove the bowl in order to transfer the special “cushion” to the place for washing. Geotextiles are placed at the bottom of the prepared area. A crushed stone pillow is being prepared on top of the new one. The ball must reach 30 cm. Then the reinforcement is finished and concrete is poured.

You can dig a hole yourself or clean it with special equipment. Unneeded soil can be scattered in a plot or transported.

Then the surface of the pit needs to be leveled in height, lined with geotextiles and crushed stone. The “pillow” that came out should be compacted. Then the reinforcement frame is ready, the cross-linking rods are drawn through the skin 25 cm. The frame, once finished, is laid on the animal. To avoid lying on the crushed stone, place the goals under different places.

If you are planning to create a large pool, you will need a lot of supplies. It is recommended to wrap it up ready-made. This will give you the opportunity to fill the entire base one time. Before finishing the filling, you need to install beacons from the pipes. It may be possible to lay the foundation for a clean article. The base is poured using a reserve at the perimeter along the entire perimeter.

During the period of time, the base can be used to prepare bowl elements made of polypropylene. For which you need to add a welding extruder with the function of cutting seams of different types. The optimal choice of material is polypropylene sheets 4x1.5 m, thickness 5 and 8 mm. Thinner material is easier to bend, which is why it is suitable for the everyday life of Roman gatherings.

For wicker seams, stitch a cord for 90º seams. The seams in the middle are made with an oval rod.

The welding of the bottom elements takes place directly on the stand. First we need to use a hand extruder on the outside side, and then use an oval rod and a hot air gun on the other side.

Before laying the polypropylene bottom, the base is covered with geotextile. Expanded polystyrene is placed on top of it.

If you don’t know how to make a swimming pool at your dacha with your own hands from polypropylene, be aware that before you start working not only with this instruction, but also with the peculiarities of the welding of this material.

After the bottom has been collected and laid, the place to move the elements of the future walls is determined. Marking is necessary so that the bowl comes out exactly as you planned. Before installation, the wall is prepared to be placed on the singing place. The connection is curled in the middle with a hot air gun. Ale is the main fastening. This is a time-consuming process to ensure that the structure has a small, shabby appearance while the external welding is finished with the extruder.

Once all the walls have found their place, we move on to the meeting.

After this, it is necessary to install the stiffening ribs. The stinks are made of thick polypropylene and the fabrics are spread on a distance of 60 cm one way at a time. The ribs are welded with a welding rod. Openings for fastening reinforcement 12 mm in diameter are prepared behind the planks. Stand between them - half-meter. In places where the bowl has a rounded shape, additional hardness is not required, there is polypropylene and a fine base. The bowl must be insulated by placing foam plastic sheets between the ribs.

To own a swimming pool like this you need:

• nozzles;
• skimmer;
• angry

Don't forget to leave the drain plug when pouring. If you forgot to collect it, then you will have to transfer the drain to the wall. And in this fall the water, which is lower than the level of water, will have to be pumped out.

Opening in polypropylene can be used with the same tools as in wood.

The nozzles are connected from PVC pipes. The connection will be secured with special glue. Vikonati Qiu is awkward for a robot. The pipe needs to be covered with sandpaper before gluing the element that is connected (coil, coupling). Then, at the 45º angle, a chamfer is removed from the pipe. Apply glue to the pipe and the corresponding element and insert the pipe firmly. After 4 minutes you will disconnect the connection.

Pipes installed in adjacent places are insulated. To ensure that the insulation material is not torn off during the pouring of concrete, wrap it with tape.

It is important to properly connect the nozzles to remove even pressure on the skin. The kidney is connected in pairs, and then the central line is introduced into the center of the skin pair.

Filtration equipment, heat exchanger and other equipment are best installed in the basement. The pipes must be insulated and trenches created for them.

To prevent the strong pressure of concrete on the walls of the pool, formwork is installed on the inside and outside. In the middle it is fixed so as to keep the sides strictly perpendicular to the ground. Concrete is poured like this:

• The formwork is being installed. 2nd height – 30 cm;
• Fill the pool 30 cm with water;
• Then the same ball is poured into the rozchin;
• Through the doba, the pool again increases by 30 cm;
• After transferring the formwork, the ball is poured.

After the tasks have gained importance, you can move on to the occupational activities.

Types of pools

Consider all possible types of designs if you are planning a swimming pool at your dacha with your own hands. Photos will help you choose the best option that is suitable specifically for your plot. It may be better for your partner to do without the daily routine and use a portable or inflatable structure. We would like to present to you a short review of the most popular pool designs.

Such a pool will not only refresh you from the sun, but will become a wonderful beauty of the dacha area.

The shape is good, handy and beautiful. You can easily play with the level waters by choosing a place with a difference in elevation.

A small and compact pool with a small depth will make your children happy! It’s a good idea to pick it up for the summer and pick it up for the cold season.

Call on one to be afraid of the deep, and the other of the deep. Thus, both adults and children can enjoy water procedures.