Furniture fittings: types, classification. How to choose furniture for fittings, color for the Type of furniture fittings
Accessories- these are the warehouse and manufacturing parts necessary for the preparation of a whole item. Accessories are mainly prepared outside the main warehouse production process, as they will require different manufacturing technology.
Types of accessories
Accessories include:
- furniture,
- budivelna,
- vikonna,
- vzutteva,
- haberdashery.
Range of household fittings reach wide, for example handles, hinges, locks, access control system, door closers, interior systems, door strengthening, fittings for glass doors, for windows, for hanging and tensioning frames, ventilation grilles, perforated fastening corners, edges sawing plates, beam supports, brackets for important and large-sized fastening, all fastening fittings.
Furniture fittings include furniture handles, clamps, hinges, brackets, ties, sets for attaching mirrors, screws, half trimmers, rolls, furniture supports, hangers, clamps, mechanisms for hanging drawers. Fittings for furniture are rather an invisible part, a lower decorative element. By properly selecting the components, you can evaluate the practicality and handiness of the furniture.
Vikonna fittings- this is a system for connecting window fittings to ensure that the doors are pressed against the frame along the entire perimeter, and the drive is in the required position. Window fittings can include perforated fasteners, window screws, brackets, handles, door springs and much more. Window fittings can be rotary, tilt-and-turn, or parallel-solid. It is very important to choose accessories from elements of the same system.
How to choose fittings
Accessories to choose It is necessary to ensure the value and functionality of the design, the strength of the vikoristan is required to ensure the importance of wear-resistant power. The cream must be safe, durable and look aesthetically pleasing. The fittings must be operated smoothly to help prevent premature wear.
It is necessary to remember that all power components are made of metal, and for the leather type of fittings their material is used. The plastic is used only for decoration, but is not liable to bear any desire. To increase the service life of the fittings, the metal surface is coated with zinc and chrome.
Clean fittings guarantee the durability of the devices and their comfortable operation.
The furniture fittings market is expanding and updating with new products. The stench may please you if you are a bazhannya spozhivacha.
The fittings are divided into front and fasteners. Hands, legs, locks are brought to the face (stinks appear above all). Fastenings - these are screws, brackets, rolls, screws, couplers, mechanisms, placements in the middle. In addition to traditional elements, we are increasingly familiar with static and new mechanisms - gas lifts, dampers, closers and others.
The current furniture market offers fittings from both well-known manufacturers and little-known companies.
Select accessories
How to choose the necessary fittings so that they are clear, functional and at an affordable price?
When choosing facial accessories, pay attention to the current look and design. It is important that it harmonizes with the sophisticated design of the furniture. Ale, there is no need to forget about militancy.
Since the fittings are fastened, it is necessary to focus on functionality and brilliance. Where to find the strength of the furniture.
Find the necessary fittings using the furniture catalog on the websites of stores or furniture showrooms. The catalogs present an assortment of furniture fittings from famous manufacturers that sell on the current market in many places. The most popular ones are: BLUM, BOYARD, Hettich, Hafele and others. At Cataloza you will find photos of fittings for any type of furniture.
If you have difficulties and doubts when choosing, it’s best to contact a sales consultant for a furniture showroom or online store. There is no point in experimenting with such speeches. Try to choose the best from what is available at a lower price.
Different types of fittings
Sometimes some furniture breaks and requires replacement of fittings or repairs. To replace, select original fittings or a special finish for the selected element.
For example, handles are present on all furniture. In addition to its direct function, it can be in perfect harmony with the design. Furniture handles come in different shapes, sizes and colors. They are divided into several types: handle-bracket, handle-button, handle-drop, rail handles, mortise handle.
Furniture hinges are one of the main elements of furniture. The stench is divided into cards, strips and others. There are always one or two hinges in the design.
More reliable ones with joints, the smell is resistant to sagging. Further research has shown that 40,000 cycles can be achieved.
Straights for drawers are divided into two types: roller and culm. Kulkovs collapse easily and silently. And the rollers have a small amount of play, and when they roll, they have a slightly quiet, or even quiet, sound. Clean furniture is more likely to have a direct fit, smells more reliable, is lighter and quieter.
Metaboxy plays an important role in saving space. They will successfully renew the kitchen and help empty places to be more functional.
Metaboxes represent a pair of supporting straight lines (left and right) and two straight lines, like the walls of the boxes.
The shelf holders are classically bad at suppressing the police. The best option is Kutovi. They have a larger area and a more attractive appearance.
Fastening systems are presented in a wide range - screws, bolts, nuts, staples, buttons, bolts, screws, self-tapping screws, rolls, dowels and others.
Types of furniture and fittings before them
Accessories for kitchen furniture are selected to ensure the best quality and comfort. It’s simple at first glance for the ladies to go to work in the kitchen and improve their appearance.
Kitchen fittings include the following elements: handles, hinges, hanging boxes, metaboxes, slats, legs, racks, cargo racks, straight, drying racks and other parts. The kitchen fittings are mostly metal, some are wooden, glass and plastic.
It can be said that fabric for furniture is the clothing, and fittings for upholstered furniture are the heart and soul. If it requires repair, then it is easy to find the required elements.
Accessories for meat can be divided into many types: legs, rollers, transformation mechanism, hinges, spring blocks, lifting mechanisms, accessories for connecting parts and the block, decorative elements, hinges, couplers and other elements.
Fittings for cabinet furniture consist of handles, hinges, locks, ties, legs, rollers, hangings for wardrobes, hanging boxes, trims for warehouses, hangers, hangers, decorative elements and fastening systems.
Installation of fittings
The bright fittings are insured on a vikoristan trival. If there is a breakdown of the furniture, then repairs or replacement of the required element are required. Sometimes it happens that the simplest mechanism is difficult to repair and rather than replace with a new one. The instructions for fittings will help. For example, you can easily and quickly change the handle or hinge.
And it will be difficult to replace the hanging mechanism of a misunderstood person. In which case it would be better to turn into an accomplished furniture master. Installing fittings on furniture will require thorough knowledge. For this, please contact a specialist for replacement.
Photos of furniture fittings
The main gun fittings are parts of the gun, which were traditionally made from wood (stock, butt, pistol, handle, chuck), and nowadays are often made from high-grade plastics.
Accessories, as a rule, are prepared separately from the production of the main warehouses, since most products will require a different technological process.
Encyclopedic YouTube
1 / 1
✪ Samet furniture fittings
Subtitle
Furniture fittings
A number of additional materials (hinges, latches, handles, ties, shelf holders, etc.) that are used for preparing furniture.
Types of furniture fittings
- Furniture handles
- Lifts and lifting mechanisms. Furniture door mechanisms are replaced with furniture hinges as a design solution. The different types of lifting mechanisms depend on the type and size of the doors.
- Mechanical- to be used for tilting facades uphill and for chairs that swing down.
- Gazovi- vikors are used to raise the facades of furniture assemblies. This design of the mechanism allows for smooth lifting of the façade and smooth progress during descent.
- Vertical ventilation
- Vertical ventilation using a damping system- vikorist for facades made of aluminum profiles, wood, chipboard, different heights and walls. The mechanisms allow you to open facades on a vertical plane with fixations in any position. This design of the mechanism allows for adjustment at 3 levels.
- Support- fastening devices for furniture to ensure the interaction of the furniture with the elements of the space. Vikorist for tables, shaf, bed etc.
- Polkoutrimuvachi- an element of the fastening system that allows the clamp to be tightened and allows for adjustment and fixation of the clamp.
- P_dsklyanniki- a type of furniture fittings that is used in the production of furniture and is used to enhance the lasting power of the products that are produced.
- Ties- type of furniture fittings, purposes for connecting different parts of furniture (screws, bolts, etc.).
- Furniture locks- Intended for mixing furniture materials. The furniture lock system has a separate lock, the handles and the cylinder core are of the same type.
- Edge materials(not with fittings, go up to cheese and materials)
- Hanging drawer systems- mechanisms behind which furniture drawers hang.
- Elements of improvement stilnytsya. They are made from various materials, such as plastic, aluminum with anodic coatings, etc. The main advantages of the linings and sticks are the thickness of the wall and the radius of rounding of the façade edge of the wall. The assortment of colors is supported within the framework of limited combinations of colors of the surface plastic of the frames themselves.
- End pads- seal to cover the end face of the frame and for decorative finishing.
- Sticks The 90° angle is designed for a beautiful and neat connection of the cutting edges under the 90° angle.
- The 180° sticks are twisted to connect the cutting lines under the 180° angle.
- Furniture drawers. The reinforcements that are used in furniture manufacturing come in different configurations and are made from different plastic materials (PVC, silicone, plastic, elastoplast, etc.). The main types are reinforcements for wardrobe systems with door surfaces ranging from 3 mm to 10 mm, as well as reinforcements for framed facades made of aluminum and MDF profiles. And also without any limitations of specific directness. The function of reinforcements in furniture making is not only the clear pressing of parts, but also the protection of one type of one (folded - metal, plastic-metal, etc.)
Vikonna fittings
This is a system of mechanical window fittings designed to ensure perimeter (along the entire perimeter) fit (press) of chairs to the frame, as well as drive chairs into position. A set of fittings for a window profile must consist only of elements of one system; the fittings for a window profile are designed so that the parameters of the profile system contained in the fittings can be reached by the home regulation. Accessories for windows are divided into three levels of anti-break resistance:
Accessories - additional components necessary for sewing manufacturing. The fittings serve for securing sewing threads, attaching, marking parts of these threads, as well as for the ease of operation of the garment. The following items should be included in the sewing machine accessories: hooks, fasteners, buttons, hooks, loops, buckles, textile fasteners (Velcro), blocks, fasteners, elastic tape, etc.
Gudziki serve to secure the stitches behind additional loops or to decorate the stitches. There are different types of guards: for materials – plastic, metal, ceramic, combined; behind the fastening elements - with the openings, with the eyelet; for the method of production - cast, pressed, mechanically formed, stamped, assembled; from the pieces - without dry-decorative coating, with dry-decorative coating, embossed with foil.
For the production of plastic pipes, various polymer materials are used: aminoplastics, phenoplastics, polyethylene, polyamides, polystyrene, polypropylene,
poliefiri et al. Plastic hoods are classified into the following types: for women's, men's and children's clothing; shirt, white shirt and other sewing products. Behind the design there are hoods: with two or more openings, with an eyelet, with a hidden eyelet. Depending on the processing method, the pipes are divided into regular ones (various models of pipes, without small parts) and custom ones (tin pipes with metal coating, with inlay, with small parts, with a pearlescent effect, etc.).
The industry produces pipes of various sizes. The thickness of the visors is determined by their characteristics, but is not due to being less than 1.6 mm.
It is customary for coats to use pipes with a size (diameter) of 26 mm or more. Jackets (for men's jackets, jackets, women's jackets, etc.) are produced in sizes 20-25 mm, cloth (for women's and children's cloth) -7 mm and larger, trouser jackets - 14-17 mm , white (for human, female, child and plain white) - 10-19 mm.
Coats and jackets for men's clothing are characterized by simplicity of shape and design. The stinks are round, flat, with slight recesses and convexity on the front side.
Waistcoats for women's clothing (coats, jackets and cloth) are produced in different shapes and finishes: flat (round, oval, tri-cut, with a carved trim on the front side - smooth, convex or ridged efnym little one), limbs, cylindrical etc.
Whereas for a human garment, the hoods are selected based on the color of the main fabric and serve, as a rule, for lining, but in women's clothing, especially in cloths and blouses, the hoods perform functions not only ibki, ale i odrobki. For women's clothing, the tails are selected according to color, size and shape depending on the model of the virus.
Metal trouser shorts are produced in two sizes (diameters) - 14 and 16.5 mm, with a thickness of 3.5 and 4 mm, with different openings. Stamp them from cold-rolled low-carbon steel strips with a thickness of 0.2-0.25 mm.
Gudziki are made from wood (boxwood, birch, maple). The path of mechanical processing is woven through the horns of various sizes and models. The stench may be of natural color or flavor; Vikorista is important for the top Odyag.
Mother-of-pearl gudzhiki are prepared from the shells of sea and freshwater mollusks using a mechanical method (mug hanging, hole drilling, grinding). To enhance their new appearance, after mechanical processing, the mother-of-pearl horns are soaked in weak and boiling hydrochloric acid. Such buzzers are cut with a specific sparkle that shimmers. They are released from two or more openings with a diameter of 10 to 20 mm.
Mother-of-pearl jigsaws are characterized by resistance to water, high temperatures, acids and acids. Smells are used mainly for clothing, as well as for women's clothing, children's clothing, summer suits and coats.
Glass bottles are produced with a diameter of 8-10 mm and larger with openings or an eyelet. For decorative finishing of glass beads, use silicate farbs, gold preparations, sawing and other metals, decalcification methods, etching, polishing.
The truth of the gulls is determined by the results of the external survey, and by the indications of their main authorities. When viewed from the outside, the guzzles indicate the correctness of their shape, size, and smallness on the front side. Gudziki must be free of rips, cracks, stains, and not have any sharp edges or rips. This is especially important for your eyes; the fragments of the thread of the stitches that are used to wipe out the tip can be quickly cut on the sharp edge.
Plastic visors are required to vitrify and statically apply: not less than 3 daN - visors up to 12 mm in size and not less than 5 daN - sockets larger than 12 mm in size.
When testing for accuracy, the buzzer must be placed on two horizontal supports, extended at a distance of 2/3 of the diameter of the buzzer. Tips made from metal, aminoplast, polyamide resin, phenoplast, polyester resin, propylene must be tested for chemical resistance. Testing is as follows: perchlorethylene heated to a temperature of 60 °C, lower the tails sewn onto the fabric, and dry with a stretch of 15 minutes; then let the goosebumps dry. The testing cycle is repeated 5 times.
Tips made of polyamide and polyester resins, copolymers of styrene, kraidyl, propylene are tested for heat resistance. To sew the beads onto fabric, boil them in 2% mild soda for 20 minutes, then dry them. The cycle is repeated ten times.
The durability of the preparation of the pipettes is checked by wiping the pipette five times with a white cotton cloth soaked in hot water (temperature 80 °C).
Test the beads with galvanic metal coating using the thermal shock method: place the vial with the beads in hot water (temperature 70-75 ° C) for 15 minutes, and then add water at a temperature of 10-12 ° C. The cycle is repeated several times. After such processing, there are no cracks, swelling, or swelling on the lips.
Metal trouser hoods are tested for corrosion resistance. Testing is carried out in a desiccator at a water content of the middle of 96% and a temperature of 18-25 °C. The apricots are placed on a porcelain grid of the desiccator and kept above water for 24 years.
The zip fastening is made up of two lines and straps, which come together when the castle collapses. The metal fastener comes in four types: A - with one lock and a non-removable interlock; B - with two locks; B - with one lock and with a rosette; G - with two locks, rosemna.
For sewing threads, use metal and plastic fasteners of several types.
The length of the fastener can be from 70 to 1800 mm. The fastener straps can be made from steel, brass or plastic. Other parts of the fastener - upper edger, lower edger, lower edger body - can be cut from the same materials, as well as from low-pressure polyethylene, phenolic plastics, polyamide resin and polyethylene roll.
The fasteners must be vitrified without changing the performance indicators for at least 500 (700 for the YUS type fastener) cycles of sub-movements (30 moves per turn). The thermal resistance of snap fasteners, including zip fasteners for trousers, is checked as follows: place them in a drying cupboard for 2 years at a temperature of 70 ° C (type 0) or 100 ° C (types 10 and 20). Thermal resistance of the zip fastener for pants is determined at a temperature of 150 ° C, placed in the closet for 3 s. After 1 year of repair, the fasteners must save time. To increase chemical resistance, seal the zippers in a container with perchlorethylene for 30 minutes. After testing, the lock may change or increase by no more than 20%, in which case the color of the lock is not subject to change.
Depending on the width of the straps that are closed, fasteners are cut out for the upper garment: small - 3 to 5 mm, middle - 5 to 7 mm, large - 7 to 9 mm.
Buttons are spring action fasteners. According to the design, buttons with a ring spring, with an omega-like spring, with a spring bushing are divided. For materials – steel, brass, combined. Types of coating: nickel, oxide, brass, varnish.
The buttons release songs of sizes: diameter 6, 5; 7, 5; 9; eleven; 16; 18 mm and height 3; 3; 3, 5; 4, 5; 5, 2; 5.5 mm.
Hooks and loops are separated with and without a lock. Depending on the type of material, there are either steel stitches, steel or brass stitches. By type of cover the hooks and loops
prepared on nickel plated, barbed and barbed behind a previously phosphated surface.
The thickness of the hinges and hinges is installed using the organoleptic method, and also based on the results, the indicators of mechanical strength and corrosion resistance are tested.
The hooks and hinges are of the correct shape, straight, smooth, without traces of corrosion. The lacquer bath is the same without bubbles or spills. The hook must easily enter the loop. The mother is not to blame for bulges and sharp edges.
Testing of slacks and loops for corrosion resistance is carried out in a desiccator, where the moisture content of the middle becomes 96%, and the temperature is 18-25 ° C. After using the desiccator for 24 years, there are no traces of corrosion on lacquered, nickel-plated, or sintered products.
The mechanical power of the hinges and hinges is verified according to the current order. The hook and loop, clasped together with one pair of lugs, are pulled onto tightly secured steel pins, the diameter of which corresponds to the diameter of the lugs. Before the next pair of ears, add a weight of 0.5 kg, which is gradually increased, thereby bringing the weight to the limit. After removing the tightening hook, the loop is not guilty of excessive deformation.
Buckles, frames, rings. These plants produce various forms from steel rods, stitches or steel and brass sheets. The stench can either be cooked or cooked. The buckles depend on the shape and size of the belt and the tension between 100-250 daN, frames 40-250 daN and rings 15-200 daN.
Textile fastening (Velcro). This new type of textile fabric is a rose-shaped joint that consists of two stitches. The front side of one (loop) stitch has closed loops created with special monofilaments. On the front side of the other (hook) stitch there are stitched loops that make a wide cut, in
Why are the gags made from these loops? When a loop stitch and a stitch stitch are connected, the closed loop enters at the side of the opening of the loops of the stitch stitch and is carefully connected to the stitches of these loops.
The tensile strength of a textile fabric is assessed by the indicators of heat resistance, linear strength, resistance to multiple discharges, service life, resistance to changes in temperature and moisture, hardness and when deceased. The importance of sealing the fastener is usually characterized by tension during winding, tension during tightening of width, and tension during loosening.
Textile fabric fastenings with tension are 0.02-0.01 MPa, stress with tension is 0.20-0.05 daN/cm, tension with tension is 0.03-0.06 MPa.
Furniture fittings are additional materials and accessories that will be assembled during the production of furniture. Furniture fastenings are often added to the fittings, although there are two different categories of elements for assembly. The fittings provide an additional and decorative effect, since the fastenings may render them unfunctional and wear out parts of the furniture.
What are furniture fittings like?
The fittings include:
- Loops.
- Directly.
- Half-morning.
- Pens.
- Support.
- Gacks.
- Locks.
- Shock absorbers
- Violentists.
- Magnit.
- Closers.
- Railing pipes
Loops
One of the most important accessories. Stinks are used for loose fastening of doors and chairs. Their principle is similar to that of basic hinges for interior doors, but they have smaller dimensions. The show has a great assortment of accessories, the price of which can vary dozens of times. The most cost-effective are the hinges that are used for pre-installation, which can be installed only after installing doors or chairs. Most of the time the stench is unbearable, so there is often no need to buy additional expensive accessories.
All furniture hinges can be divided into 3 categories:
- Chipboard and MDF.
- Masivu.
- Sklo.
The hinge, which is used to fasten furniture made from MDF, transfers the front cutting into the material to provide a larger flat contact for fastening. On the other hand, chipboard may not have enough thickness, so the screws screwed into them can become uneven. The installation of such accessories will require a lot of time, otherwise the use of other methods of fixing doors will be less reliable. The cut-in under the loop is like a feather.
For natural furniture, special hinges are installed, which provide a classic look and provide accessories for interior doors. The stench just reaches the doors and the base of the furniture, after which you need help. Often such furniture fittings are deprived of their markings, so this is an added bonus.
For furniture made from glass, special hinges are used. The skin half is folded into two parts, like breams, they press the glass on the part, preventing it from being licked. Therefore, for their installation, it is necessary to carry out a front drilling at the joint, otherwise it is not obligatory. More expensive fittings allow you to fix the doors without preparing the openings. Often such loops are combined. On one side the stench is transferred to the dirty doors, and on the other to chipboard, MDF or solid wood.
Directly
This furniture fittings are designed to ensure the fixation of furniture drawers and the straightening of their frames during knitting and stitching. Almost all furniture is equipped with drawers, which are manufactured in factories and made directly from metal. Wooden planks, which are used to make the top of the drawers, the old method are no longer used. Call directly to roller smithing. Zavdyaki whose stink will go smoothly with minimal noise and zusillyam.
Directly for the skin, sold in pairs. One purpose for fastening is right-handed, and the other is left-handed. This leather element is made up of 2 parts. One is screwed to the side of the cabinet or hat, and the other is screwed to the bottom of the drawer. There are also other direct designs, which instead of rollers have vicorized balls.
Polkoutrimuvachi
To detect significant police, there will be half-mashers at the closets and cabinets. They act as a boundary guard, who does not allow the police to fall under pressure. The primary ones are cylindrical trimmers made of metal. Їх vikorysts 4 per skin police. These are budgetary options. They are small in number and have a small area of contact with the surface of the surface, which means that they should only be stuck in structures that may show minor interference. More durable are trims with a front, which seem to represent the middle ground between a cylindrical accessory and a neat little bundle.
To fasten the police from the wall, we use the vikorists from the clamp. If the stench is noticeable, then you will have to pay for more additional material. Most often, metal coated with chrome or porcelain becomes stagnant.
Pens
Almost all furniture that is equipped with doors and chairs is equipped with handles. There is a wide range of such furniture fittings. This talent can be experienced dozens of times. Handles can be used to look at strips, shells, buttons, etc. It is on this fittings that designers most often emphasize respect, but it loses its importance. They constantly poke at the handles in order to open the screen or the chair. Associated with this stench is the presence of bottles made from acidic, wear-resistant material. Cheap handles are made from wood and plastic. The most important thing is the fittings with an artistic design, for example, made to look like a leaf or the head of a creature.
Support
This fittings are not required, since not all types of furniture are delivered in a frozen state. The stops are represented by legs and rollers. Cause the stench to settle on the sofas and armchairs. Shaffis and writing tables are supported along the entire perimeter, so there is no need for legs around them.
The simplest pads are gum pads that soften the harsh pressure on the cover for the lining. More expensive fittings may allow height adjustment. You will be stuck in that situation if there is an imbalance in the status. These legs are made up of two parts. One is attached to the bottom of the furniture, and the other is twisted, changing height. In this way, as a matter of fact, the surface of the furniture can be placed evenly.
Gacki
Such furniture fittings are used to equip wardrobes and front rooms. The garment is hung on it using additional loops. The hooks can be single or double. Depending on their dimensions, lay down what kind of clothes you can hang. Small ones can be used to heat a jacket or coat. Great gacks can eliminate droplets.
Locks
For furniture that contains special locks to protect valuable speeches. The stinks are noticeable in the case of classic doors of smaller dimensions. Obviously, the step of his lordship is wise. Locking the doors with a lock is not a problem, but it will be obvious that such furniture fittings still have a place. At the sale, you can immediately install reliable locks, or completely install them only on the gates of the array. Natural wood is more resistant to a mechanical vice, which prevents the screws that tighten the lock from coming loose. In case of chipboard or MDF, the material itself is supplied, and not the lock, so you do not need to overpay when purchasing.
Shock absorbers
This is a new type of fittings that will ensure the opening and maintenance of horizontal doors when open. Invite them to stand near the top wall cupboards. These accessories are identical in appearance to the gas shock absorbers that lift the trunk line of passenger cars. Stinks are classified as stinks, which need to be eliminated. For small thin doors, budget shock absorbers are used, if you happen to deal with a serious problem, you will end up wasting money, if the shock absorber is not installed, then the doors may fall and cause injury.
Vidbiyniki
These are budget-friendly, simple fittings, just like a small sticker. Sometimes there are punchers that look like a push pin or are equipped with a flower and a gum pad on the drop. They are installed in the furniture at the ends, where it comes into contact with the front of the drawer or the door that opens. The soft surface of the beater avoids a strong impact in case of careless closing of furniture and avoids damage. The use of this type of fittings reduces the difficulty of closing drawers and doors.
Magnity
This furniture fittings are increasingly being developed in connection with the development of sophisticated mechanisms. It consists of two elements: a metal plate and a magnet. The cover is screwed to the inside of the door, and the magnet is placed directly on the bottom of the cabinet or cabinet. When the doors are closed, they will sit back and not open on their own.
Closers
This fittings are included in one of the most expensive roads. There is a middle ground between a gas shock absorber and a shock absorber. This function lies in the hinges of the doors that are closed, or the chairs are directly in front of the remaining components. If you lower the doors, the stench will not growl, but will cover up completely. Some door closers are mounted in a loop, which is another option. Budget fittings are installed nearby. In this case, the role of a soft beater, which cushions, effectively works only for a slumped arm, does not pull up the door behind itself. Such a door closer is suitable for installation only in cases where the hinges have the power to press on the door independently when closed.
Railing pipes
To equip the wardrobe, pipes and straight rods are assembled to ensure fixation of the hangers with the garment. The smells are made from steel or aluminum. This fittings are extremely sophisticated, so you should be afraid to finish it. It is important to choose a stainless steel pipe, the surface of which is polished and not coated, so that the scraps can be easily removed by rubbing the surface of the paste. Sometimes such pipes can be installed in the kitchen, where ladles are hung on them.
