Xiaomi mi3 proximity sensor. Calibration of sensors on Xiaomi: how to calibrate the proximity and light sensor

Why doesn't the screen turn off on the phone when it's up to wah? In this article, you will know the information how to enable the function of blocking the screen when roaming in the Xiaomei settings. Like on your Xiaomi smartphone, with the input or output of the call, the screen stops turning off and blocking, if you lift the phone to the ear, then you can enable this function in Android settings. It could have been absolutely disgusting and you just didn’t remember, otherwise your children went through the phone and turned off the proximity sensor. In our application, it is shown how to turn on the proximity sensor on Xiomi Redmen 4X if you brought the phone up to the screen, the screen was blocked and turned off. Possibly, the information goes to other Android smartphones and tablets.

Sob on Android automatically blocking the screen when you bring it up to the air, it is necessary to activate the attack. Vіdkrivаєmo on Xiaomi іkonku phone i praplyаєmo tidi de mi ring the dialed number for the call. Dali pressed on the touch button "menu" in the form of three horizontal females. (On some Androids, after opening the “menu” phone, you can open the touch button at the same time by looking at the three husbands on the screen on the left side. buttons.

Then, at the menu on Xiomi, select the item Entering the call for a short description of the possible adjustments (additional adjustments of the behavior will be attached at the entry of the call).

In the menus of the "Input Calls" on Khiaomi, we know and select the item proximity sensor it will be written (switch on the screen automatically when the phone is opened until the next hour of the call) and turn on yoga. Done, now, if you lift the phone to the ear, the screen will turn off and block, you yourself will be able to beat the pressure and dotik to the touch screen.

• We will be glad if you add some advice or share basic information.
• Thanks for the chuynist, dodatkovu іnformatsiyu and korisnі please!!!

14-05-2019
00 year. 49 min.
Notes:
Thank you, dear article, for piv hvilini everything was ruined. She herself used to joke for a long time in nalashtuvannyah.

13-05-2019
17 year. 40 min.
Notes:
Redmen notes 7Bsi turned on but the screen does not go out.

05-04-2019
08 year. 40 min.
Notes:
Information posted, Redmen 3

16-03-2019
15 year old 59 min.
Notes:
Model Redman 6

16-03-2019
15 year old 58 min.
Notes:
Dyakuyu! Everything is sensibly described.

06-03-2019
08 year. 12 min.
Notes:
Dyakuyu! Redmi note 5 - everything went well!

27-02-2019
11 years old 11 min.
Notes:
Thank you very much. Model Redmi6 Recommendation submitted

05-02-2019
23 years old 30 min.
Notes:
Thank you very much. Helped) statya reading, everything is right.

24-01-2019
21 years old 37 min.
Notes:
The Xiaomi Redmi 5 phone was recommended.

28-12-2018
00 year. 16 min.
Notes:
Some kind of corny information.

12-12-2018
13 year. 38 min.
Notes:
As a sensor of activations - remove blockage in the intestines

30-11-2018
19 year old 16 min.
Notes:
Uvi. All settings are set correctly. Thanks to you, I would like to know how to check it.

22-11-2018
12 year old 43 min.
Notes:
Chi does not turn on the screen when opening. Proximity sensor for which activations

21-09-2018
15 year old 20 min.
Notes:
I have Redmen 4 And it all turned on, but only with special calls, and if you call with addenda (watsap, imo ...) it doesn’t work, don’t block. Yak buti itself with addendums?

01-09-2018
07 year. 47 min.
Notes:
Why, if I receive a weekly call or call someone. My screen is flickering. When you try, turn on the screen for additional blocking, no result. Vimic was applied and turn on the proximity sensor. It didn't. What work?

23-08-2018
13 year. 36 min.
Notes:
Great dyakuyu!

11-07-2018
13 year. 12 min.
Notes:
At the end, it is necessary to re-advantage.

28-04-2018
12 year old 57 min.
Notes:
Thank you, core information

side 1

Xiaomi mi a1, if I got into a defect, I immediately broke the charging module. Repair of claves, 1500 rubles, in St. Petersburg. At the same time, the proximity sensor is buggy. Now, with a call, the screen is dimmed, and turned on, there is no possibility. Why do you need to know?

The lads were rappelling like a bida, on the screen there was nothing by itself on Siaomi mi a1. Thinking about energy saving, I turned it on, and robbed a lot of rubbish, but nothing helped. Ryatite, let me stand glad.

I got stuck with the wrong senseriya on my device, Мі а1. I don’t react, but I wanted everything to work out, even if it’s only been a month. In the other case, the phone is more classy, ​​not skilki not shkoduvat, scho buying yoga.

I have one; Software security on these phones is buggy. At once, if the sensor is removed, you need to press the phone hard to the ear, so it won’t react.

side 1

How to turn on or enable the proximity sensor on Xiaomi mi a1.

As soon as the gadget function is turned on.
In the menu, select "input dials" and select "proximity sensor" and move the slider to the right, and that's it.

They used to glue on a slab, and spent an opaque object on the senseriya. Those sensors will show incorrectly. So, the case can be put on a robotic accessory.

The sensor itself, it’s rotten to try to enter the additional code * # * # 6484 # * # * in this Single Item Test menu, select Proximity Sensor and there you will show far and near the object in the phone.

If there is no such menu, the phone must be switched off and pressed the power button and + and the engineering menu will appear in the new sensor calibration. There is a lot of firmware, a menu of variances, and there is a lot of video on the Internet as well as work.

Strongly pour in programs for dzvinkiv, as if you installed it, it’s better to see it, it’s possible to stink robots.

If everything didn’t help the vikonan, then it’s more likely that you have a filthy sensor for everything, otherwise you’re guilty of evil. You can replace it with a new one and then you will order everything.

Xiaomi theme pages

Xiaomi redmi 3s proximity sensor not working

Xiaomi redmi 3s proximity sensor not working

Having correctly shown the distance, yogo is calibrated. You can enter * # * # 6484 # * # * then Singl.e Item Test will push to re-verify Proximity Senso.r and show how far the gadget is from the item.

Xiaomi redmi 4x does not use proximity sensor.
Xiaomi redmi 4x sensor fail.

Xiaomi redmi 4x sensor fail.

On the phone, all the icons are smiling and squealing. Such a fun, good-natured ride on my Huawei Redmen 4x. I swear by yoga. Hitting Xiaomі, on the display with a crack, it was so hard for the beast to stand, already cracked I sang dolamati yogo. Ale after that touchscreen, not reacting to dotik. I push harder, so nothing happens by itself.

Xiaomi redmi 4x does not download sim card.

Xiaomi redmi 4x does not download sim card.

Xiaomi redmi 4x do not download the sim card, reload the sim card a lot of times, and inserting the sim again, but don’t download the bag alone, what else can you do with the sim ???

A glitch like this worked on Redmen 4x, everything is fine, but after a month, I decided to take it, at which point I didn’t try anything, on my own. Try to insert, viimati and nothing comes up. Lighthouse Yakas.

Xiaomi redmi 4x battery

Xiaomi redmi 4x battery

My device after 40% fluctuates, but after a re-advancement, everything is fine, and it didn’t work. The battery swelled, and the lid was opened, but it’s better to work, a little less, but how can you feed yourself with such an apparatus?

Discharges at grі for 2 years, bring grati to the charge, what can you replace and what will be the sense.

YAK VIBRATI correctly. Phone Xiaomi Redmi 4x Description, prices, reviews.

YAK VIBRATI correctly. Phone Xiaomi Redmi 4x Description, prices, reviews.

description:
Functional and modern device, with a large display. An exhausting 8-core processor will not allow you to nudguvati, and the battery will take a long time to charge. Vіdminniy vybir, for lovers of functional flagships.

The new one has snapdragon installed, which is really cool, but it's a modern and new processor. 8 cores at 1.4 GHz.

Falling near the water xiaomi redmi note 4

Falling near the water xiaomi redmi note 4

Been on the streets and listening to music, having drunk on the board and the phone in trimav shorts, nothing came up. Ale, you’ve gotten better this year, having spent a lot of time on your board, and yet you’re just lying on the phone in the swarm. Priyshov vyinyav xiaomi and unlocked, for an hour to marvel, and vіn vikneniy. Trying to turn it on, ale wine does not react to it. I need to somehow confirm in the new, all my important information is entered, and a photo.

Xiaomi mi a1 is being re-vanquished

Xiaomi mi a1 is being re-vanquished

At the same time, all sorts of non-standard programs for androyd, and glitches can appear in an hour. Chim mozhe viklikati gadget glitch. Chi is not running the program - tse does not mean that it does not work. The next step is to clean the device from non-essential programs. It’s like that one add-on launches Wi-Fi, and otherwise it turns on.

The proximity sensor on Xiaomi or the light sensor is necessary to control the automatic brightness of the screen. Being calibrated incorrectly, wines can allow pardons, for example, calls, as if to call for a ringing hour. However, everything can be corrected. On the back, try re-vantaging attachments. Is the problem gone? Let's take a look at other reasons.

Turning on yoga is easy. The problem is small in that, in the presence of a model and a component, the firmware of your Xiaomei, the algorithm will be revised. For the Xiaomi Redmi 3S model, the order of steps is:

• open the dial pad;
• go to the tab "input calls";
• find the proximity sensor in the list of options;
• now you bachite yogo camp, like vin vimkneniy, move the bellow to the protilezhne camp.

For other models, the on / off function is located in a different area or daily. Unfortunately, it is impossible to give a universal algorithm, since the company does not stand on the ground in its development, releasing smartphones with new firmware.

remove blocking

Another reason for the problem is that the "Blocking in the gut" function is enabled. The task of this function is to turn off the screen, if the phone is in the gut. Inaccuracies with the light sensor are mostly due to this function. However, it is easy to solve the problem:

1. Open the menu "Adjustment".
2. Go to Wiki.
3. The final point is "Entrance doors".
4. Find the function and move the bobbin to the "Off" position.

test sensor

Even though the front edges did not bring bad results, the light sensor had to be calibrated. Ale, it is urgently necessary to conduct a yoga practice test.

Respect: this parameter is overridden on Xiaomi Mi 4 and Redmi 3 Pro models. For other devices, it is recommended to familiarize yourself with the engineering menu first.

calibrate the sensor

Pass test successfully? You can fix the calibration of the proximity sensor on Xiaomi. The next algorithm is relevant for Redmi 3S.

Other causes of problems

The reason for this is that the automatic glitch is buggy through an incorrectly selected shield for the screen. Deyakі skolі і plіvka іn't transfer spetаіlіh otkіlіnі іd іd sensor, yakі nahodіlії nіdії іn іn frontalї ї camera. Turn over my spit. Navit being correct behind the world, you can make a transition for yourself through the presence of the necessary openings. Especially often this problem is blamed on coristuvachs with universal swimmers and glasses.

Chi does not work the sensor often after replacing the original Xiaomei screen. To solve the problem, you need to return to the service center.

Another reason for the malfunction is incorrect, or I will add an old firmware. You can correct it by switching to new firmware versions. However, do not forget that after the update, all data and additions will be deleted. Yak, vtim, i zayva or shkіdliva іnformatsija.

Please note that all methods of resolving the problem with the Xiaomi proximity sensor are of a recommendatory nature. If there were any problems, I didn’t get far, go back to the authorization service center.

Smartphones are becoming more and more foldable and are constantly updated with new features. Zocrema, gadgets based on MIUI 8 are equipped with different sensors that help in robotics. For example, for the correct regulation of the automatic brightness of the display and for the yogo switching on the telephone line, and for the light sensor (observation). Sometimes yoga robots blame problems due to incorrect calibration: for example, if the sensor does not turn on the display for the hour of calls, it may be wrong to press it with your ear. The reasons for incorrect calibration may be unknown. Even though the phone's last reset didn't fix the problem, let's try to fix it.

1. Xiaomi Redmi 3 proximity sensor. It’s easy to turn on yoga (it’s like the butt of a Xiaomi Redmi3s smartphone): open the dialer, then press the menu and select an item from the list "Entrance rings". You can chat there "Proximity sensor". Yogo needs to be turned on. Through those that Xiaomei has great impersonal models of phones and their firmware, it’s impossible to tell the exact location of this item. Like setting up every day, it’s possible to search for a wart in another place.
2. It is also a common reason for pardons in the touch sensor robot on Mi Max or Redman Note, the gadget blocking function may be launched, as it does not allow it to turn on if the phone is lying in the gut. Through this, the Xiaomi 3S proximity sensor often lags and fails. To enable vikonaty її turn on, you need to go to "Nalashtuvannya - Vikliki - Vkhidni dzvinki", De wi sing a little bug, which you need to put in, to turn off the function.
3. In addition, the reason for the poor performance of the sensor on the Redmen Note can be physical changes, for example, it’s bad or bad. Turn over, chi є on the plіvtsі special open the sensor, and yakscho can't - change the protection or swipe and open it with your hands. Most often, the sensor is loosened near the front speaker and the front camera. I will most often create a similar problem with universal ones, or simply with low levels of scaling and smelting, and it is recommended that before buying, it is recommended to carefully check that you open everything in reality.

Xiaomi Redmi Proximity Sensor Calibration

How robust is it that everything on your Redmi Note 3 does not use a proximity sensor? It is necessary to calibrate the sensor - this method is one of the widest. For which order to reverse, which is the right sensor to fire: in the call menu, enter the code *#*#6484#*#* (Without pushing the wiki button). See the engineering menu (we checked this method on Xiaomi Redmi 4 Pro and Xiaomi Redmi 3 Pro, but it didn’t work - read the article about how to use the engineering menu) with five buttons. It is necessary to press on the top right with the writing Single Item Test. Let me know below Proximity Sensor and click on it, you will spend it in the test menu. Here it is to blame for writing “Close” or “Far” when the sensor is closed with a finger. If the sensor does not respond, it means that the fault is broken, and if the test is successful, you can calibrate the Xiaomi Redmi 3s proximity sensor:

• Vimknіt attachments;
• Press the button for goodness +, and then - the button for eating. After vibration, let the buttons go;
• Check out the Chinese menu. Click on the 中文 button at the bottom right under the Download 模式 button. Mova become English;
• Click on PCBA Test vgorі i bachimo іnzhenerne menu. go to Proximity sensor;
• Put the phone on a smooth horizontal surface, wiping the light sensor in front with a soft cloth;
• Turn on bright light on your smartphone;
• Click on Calibration i bud while the sensor is being calibrated;
• After the end, you will write Successfully- the sensor is successfully calibrated.

To check the correctness of the robot, cover the sensor as if it is impenetrable (for example, with a finger) - a lone on the screen is guilty of changing to zero. After completion of the test, emboss on the key Pass, After what is consumed in the engineering menu and embossed Finish-Power OFF. Let's then turn on the smartphone again, how to ring and check the correct operation of the sensor: when ringing, if the phone is turned on, it is necessary that the sensor turns on the display.

We give gifts

Outstanding battery Xiaomi Mi Power Bank 2i 10000 mAh

Silicone case as a present

Report

Outstanding battery Xiaomi Mi Power Bank 2C 20000 mAh

Silicone case as a present

In today's mobile outbuildings, the presence of folding additions to Xiaomi does not surprise anyone. Before them, there are different texts and media editors, a fingerprint reader, proximity functionality, lighting (light). Remaining responsible for adjusting the brightness of the screen when opened. Varto designate that the indicator of light, illumination and proximity is one scorching service.

It’s so good that the brightness doesn’t fall with the dot of the gadget to the wow. First, what is important to work - to re-adjust the phone, as the lighting did not work, then work on the adjustment.

Causes of non-working sensors on Xiaomi

1. Addendum included.

Perevіrity on the back, yogo included. To open the "Telephone" program for a long time and select "input dials". Turn on the proximity, as if it appeared out of the blue.

2. Inclusion of "shkidli" services.

Often the cause of incorrect sensor processing is "inclusion in the gut". As a result, the Xiaomi light sensor does not function properly. It's easy to fix. Go down to "Vikliki" - "Vhіdnі" and switch the flag in the other direction.

3. Plіvka or slo for zakhistu.

Xiaomei's proximity sensor will definitely not function, as it is completely closed. It is known to have a frontal camera to the beast. Therefore, it is important, in view of the mechanical reasons, to win the original cover, or to glue it universally in such a rank, so that you don’t close them.

Recheck module failure on Xiaomi

If all the reasons are overridden, then the reasons are not relevant, then it is necessary to visconate a new translation to re-verify the practicality of the function. You need to dial * # * # 6484 # * # * Do not dial back. Once used in the engineering menu, it will be available five times a day. Swipe along the upper right hand.

In the list of props, you need to know the "Proximity" sensor at the bottom.

When turning on the screen, the inscriptions "far" and "near" are to be changed (the stench also changes on the screen). If nothing comes up, then you need a salary.

Xiaomi sensor calibration

For this task, it is necessary to vikonate the following sequence:

1. Turn off your smartphone again

2. Push the increase in volume at the same time with the lights on until the signal of vibration and release.

3. Change the variator in Chinese language. Hover over "中文" to change the movie.

4. Swipe through "PCBA test" to get started in the factory menu.

If the sensor does not respond to the fingers, then the control can be implemented for the help of "Forward" and "Back".

5. Go to "Proximity sensor" and place the gadget horizontally. The option opening is not guilty of being closed and without being drawn into a new bright light.

6. Fix for the help of "Calibration". The appearance of the inscription "Successfully" means that the robot has been victorious successfully.

You can recheck the module like this. Close the opening with an opaque object. The number is guilty of changing from 1 to 0.

Press the "Pass" button to go back to the engineering variator, then use the "Finish" and "Power Off" keys to turn off the smartphone. Further, it is possible to zavantazhuvat and already, when expanding, change the function.

If this algorithm did not add the module, then the firmware can help. Another reason may be incorrect display setting.