Vegetative reproduction with cuttings Examples. Reproduction of leaf cuttings
Not always and not all plants can be well and quickly propagated by seeds. Therefore, for a long time in horticulture and flower growing, the so-called vegetative methods of reproduction - with gag, cuttings, root siblings or mustes are used.
The reproduction of grains is considered to be one of the most ancient ways, because at one time he, apparently, was noticeable and borrowed from nature itself. And today, those who grow in their sites, for example, the gooseberry, know: I will not sleep a little, and a small neat bush turns into solid spiny debris. It happens because the lower branches of this shrub, barely touching the earth, immediately rooted and give rise to new shoots.
Nature has endowed certain types of various mechanisms that allow them to develop otherwise than sexuality. This type of breeding without genital hamet is very typical in the kingdom of plants, where their people cannot move when they are tied to the ground.
First, before the existence of feminized seeds, there was no way to ensure the floor of what was grown. This assumed a double problem, on the one hand, a shortage of space, which forced to cultivate almost a double plant, until they determined the floor, and it sacrificed to male instances; and on the other - the one who has the greatest legal risk when he has to fight in judicial order For a greater number of plants in the event of a crop capture.
The rooted branch, which can already exist independently, but not yet lost ties with the main (maternal) plant and is called a molding. The main advantage of the reproduction of plants by gangways is that the new copy retains all properties and signs of the main plant, including varieties. It is well amenable to reproduction with tanks not only shrub, semi-staple, but also many tree breeds curly and ampel plants. Such is the formation, hydrangea currency, roses, carpenter., Beautiful, Ceanotus, Dale and many other plants.
In another sense, the question arose who bothered cannabis farmers, and there was a fact of providing a phenotype and genotype of plants, as well as their organoleptic properties and potency. Plants that come from seeds, although they are the sisters of the Father and Mother, can give people who are not exactly the same. The best breeders knew that the ability to perpetuate the plant characteristics is the key to the ability to improve the yield and the quality of their cultures and homogenize them.
Higher risk, together with space, time and expenses embedded in men who had to start later, together with the fact of the possibility of perpetuating the characteristics, constituted great disadvantages that were able to overcome cannabis farmers using breeding techniques with cuttings.
The easiest way to produce one or more reproduction gifts is to go by analogy with how this happens in natural conditions. That is, press or pin down the root part of the escape to the surface of the soil and sprinkle with damp ground. And then watch regularly to respected the necessary conditions For the growth and development of the chain - water, loose, make the necessary fertilizers. For woody breeds to achieve a greater effect, they dig a special groove, which is placed in the bore escape, leaving its upper part on the surface. Both of these ways are called horizontal chain And they are used more often for crops growing in the garden, where enough space to turn around. Young 1-2 year old shoots are usually rooted better than old.
Reproduction With the help of cuttings allows you to maintain the characteristics of the plant from which they were extracted, including age. But, of course, a good Mom plant is needed to extract cuttings, which was supposed to be selected according to certain and subjective parameters. Therefore, when choosing a plant, there are no fixed equipment as a mother, since it depends entirely on tastes or the needs of each cannabis farmer.
Nevertheless, we must demand minimal conditions before choosing a parent plant. We need them to be plants without malformations of development and least susceptible to possible pests. Their nutritional needs and water are also important factors, as it affects the cost of service, which, although the crop does not take much time, maintaining the uterine plant can take from several months to a year, and we should not forget that during this time they Eat and drink.
For potted plants, the method of the arcoid tank is more suitable, when the same escape is bent the arc and bother in a special container with a substrate or in a separate pot prepared for growing a new plant.
For reproduction of tall indoor colors, for example, drazes, you can use the so-called air chain method. At the same time, the new plant is grown directly on the trunk of the old. Since it is easy to sprinkle the land necessary for rooting the part of the barrel will not work, go to different tricks. Gently fix B. right place Polyethylene sleeve with a substrate, in which the root system of the future weapon will develop. Some use the old pot for these purposes, cut in half, and then connected by scotch, and the cylindrical part is suitable plastic bottle. The main thing to ensure that the earthen com did not shifted, did not save and was not overcooked. It is well suitable as a substrate various peat mixtures.
The preservation of maternal plants is also another important factor in obtaining good cuttings. When it comes to the formation of a parent plant, we must keep in mind that we need to extract the cuttings from it, and the more branched the plant, the greater the quantity and quality of cuttings that can be removed from it. For this reason, pruning education, which is always executed, should go to form very branched horizontal plants.
Power is also important, cultures feedped by chemical synthetic fertilizers produce less fibrous industries than those that are grown by organic methods. Stems are less stable and thinner, it gives an advantage and disadvantage. The advantage is that the cuttings, when they are thin, are rooted faster, but, on the contrary, even before the disasters weaken and prone to decay.
As soon as the root weight of the air chain will be comparable to the volume with the volume of the earthlom itself, the upper part of the plant is cut down just below the last root and determine the permanent place of "residence". From the parent plant or get rid of, or expect new young shoots on it. The method of reproduction can also be used for fakes, diffenbahia, phyloodendron, monsters, some species of palm trees and other indoor colors with large leaves. Tightening such plants multiply, as a rule, it is bad, because a large above-ground green mass evaporates too much moisture.
An important fact that should be kept in mind in relation to mothers: the longer we can keep every mom more time, the more you need to force a variety. Sorts whose mothers are constantly updated, over time they lose quality, and the diversity is enhanced and worsen. But you should also know that the older mother, the longer it will be needed to root her cuttings.
How to make cuttings - a task that can be performed in different ways. Both the size and origin of cuttings depend on tastes and the needs of each moment. There are cases when for various reasons the maternal plant is not developing as much as necessary, and it is necessary to extract the largest amount of cuttings, and in this case only small cuttings should be made as little as possible.
There are a number of techniques that allow you to speed up the process of forming additional apparent roots on stems and shoots for most plants. All of them are aimed at the fact that the plant has accumulated in the right place the necessary supply of nutrients and used them precisely on the root formation. On the weathered shoots, for example, before sprinkling or place them in the grooves, there are several shallow transverse cuts or one solid ring remove the bark of a width of 6-8 mm., Or tighten the stem with a metal wire ring. Another option is to make an abscessive incision for 2/3 of the thickness of the barrel. In the incision to insert matches or other struts so that it does not drag into a natural way.
The usual and most practical thing is to make only the cuttings of yolks and not cut them under it. Thus, the clones are obtained with one central eye, as if more cuttings are produced, from the second cut of the cuttings they go out with two eyes if we cannot get them. With this method, you can maintain the form of a parent plant, which leads to its homogeneous growth and the ability to maintain it as long as possible.
On the contrary, there are manufacturers of cannabis, who like to make the most of each branch and extract as much cuttings as possible. It may be inconvenience, since maternal plants are deformed, and they are much more difficult to reformat. After a bad cut, it is much more difficult to keep them in the same amount of light in its entire vegetative part and, therefore, to support them, being able to even cause a reduction in your life when forces me to update your mother.
In thin green escapes of the same effect, you can achieve the same effect, if you simply stretch them at an angle of 90 degrees. For stimulating the root formation and special chemicals - heteroaceksin, corneumine, etc. They are treated with both the cuts themselves and nearby spaces.
The best time for reproduction of plants with plants in the garden is spring and the beginning of the summer, when there is a strengthened education of new shoots. They are separated and decomposed with a maternal plant usually at the end of the season. But it happens that they leave for the next year, they gave a little greeted and strengthen.
Differences also occur when choosing the perfect size, which should have a cut, regardless of needs. There are those who make a simple incision of the yolk, with a bud of 5-10 centimeters is enough to make cutting, but there are also those who prefer to make blacks yolk and a knot that have a larger size. Big cuttings occupy a little longer to root, but also have a higher survival.
During cutting cutting, we must make sure that it is not horizontal, but should be an angle of about 45º. The reason is that in the branch that is cut on the plant, there is a small slope that prevents the water drop in the field of cutting and the formation of rotting.
Today we will talk about the vegetative reproduction (rhizomes, bulbs, clubnellukov, cornklubs, grain and cuttings) - the most common method of reproduction of floral perennials.
Vegetative reproduction
Vegetative reproduction has a number of advantages: it allows you to obtain plants identical to the maternal (with a seed method, the characteristic features of the variety are often not preserved at all or are not fully maintained), reduces the juvenile (young) period of plant development. Some perennials preferably propagate only in vegetative way, because It significantly reduces the deadline for entering new plants in the most decorative phase - flowering. With seed reproduction, such plants like saffron, peony, a dress, and others. She often comes on 4-6 years of life.
We must remember that cuttings do not have roots and cannot absorb water, it requires that in addition to providing special conditions it is necessary to make any measures to help us reduce the evapotranspiration of plants to prevent death by dehydration. Cutting the tips of the cutting leaves reduces the surface subject to evapotranspiration, and thus it is possible to maintain water on the plant for a longer time. In addition, when the cut-off leaves do not fall on the wet surface, it can be fungal focus.
Vegetative reproduction can be carried out. rhizomes, bulbs, tubers, roots, grains and cuttingsused to obtain a new plant. Methods of reproduction for some plants are listed below.
Decision root
The most common method of vegetative reproduction is decision root. Rhizome is an elongated underground part of the plant, carrying the remains of leaves, kidneys and apparent roots. For reproduction of plants, the deceives are used **, obtained from the periphery of the old bush. To obtain high-quality planting material of irises, peonies, leafers, etc. It is better to multiply the plants aged 3-4 years. With age, the rhizome develops a large number of renewal kidneys, which eventually begin to compete for living space. As a result, the kidney bush is weak, and on the periphery are stronger and viable. Therefore, when dividing old bushes is better to use the material from the outer part of the root, and the central - delete. Some gardeners are the central part of the old bush, and after a while re-divide.
With cut-out leaves, you can proceed to clean the epidermal tissues of the stem using a small blade, previously disinfected and sterilized. When we delete them, we will facilitate the fact that in a parenchyma, which is a cloth a small specialization capable of forming cells in accordance with the position it occupies on the plant, the roots can be developed if they incite it.
Commercial stimulants of rooting can be used to stimulate the formation and development of roots, which mainly contain stimulants for segregation of rooting hormones. Auxins and cytokinins, among other things, are hormones responsible for the launch of the rhizogenesis process. The market has hormones for root cuttings in powder or gel or fluid, any of them works well and performs its task. You just need to plunge into a product that is part of the trunk of the cut, which will be underground.
Most rhizuy plants have a loose rhizome, which is divided by hand or sharp knife. A very old plant or plant with a dense root system is cut in a shovel.
If you do not need the task of getting as much planting material as possible, it is better to share a bush by 3-5 decene. Plants from such decene can bloom in the first year, from the second year they form powerful, well-developed and normally flowering bushes. If you need to get many plants from one mother's bush, it can be divided into smaller decenes (with one kidney), but in this case, in the first two years after dividing the plants will develop slowly and bloom only on the second or third year. In order for such a plant, it is better to go, it does not give to bloom in the second year, rushing color pains. In case of fine division, a complete renewal of the root system occurs and in the future this plant will be stronger and more durable to multiply by a standard defense.
To choose a medium in which you need to shorten the cuttings, we also have some options. We can do it, as was done by all our lives, that is, the commercial substrate can be used as a culture environment or more comfortably and practically use a pressed peat chip before rehydration. You can also grow roots in small stone wool cubes or do it without environment support, that is, rooting the cuttings in the air with the help of an aeropon clonother. Cuttings, rooted directly on the substrate, fail smaller and have a higher chance of roots, fertilizer and convenience of rooted roots are more comfortable and more hygienic to maintain, because the aircraft to come to a naked root, usually fails more and they delay a little more after transplant .
Plant division is better to carry out in a cool, shaded place. In order to stimulate the growth of young side roots in the roots obtained, the roots are cut by approximately 1/3 of their length. Long, uncircumcised roots when landing is difficult evenly distributed in the landing point, which can lead to their twisting, reinforcement and death of the entire plant.
As soon as the cut will be completed, it remains only to give it the best conditions. Lower moisture ranges can lead to the fact that cutting will be superfluous and dry before rooting, at higher limits the problem is the appearance of rotting caused by mushrooms.
For this reason, we must provide them with a room or a small wardrobe, which acts as a pile of cuttings and in which we can recreate the ideal conditions that, if they remain constant for 5-15 days, should be rooted cuttings. It will be transplanted and will grow.
The division and transplant of perennials spend early in the spring (April-beginning of May) or at the end of summer (the end of August is the beginning of September). With the spring duration of the division, the kidney did not move into growth, only trimming the roots is enough. With summer-autumn transplants, it is necessary to cut and overhead part of the plants, leaving about 15-20 cm, because The roots will not yet be able to provide plants with everything necessary, which can lead to illness and tightening flowering time.
The cuttings are a way of reproduction of plants, as well as sowing, except that it does not create new specimens with their own genetic heritage, and clones: a new plant is completely identical to the mother's leg. The cuttings are a natural phenomenon that a gardener or botanist reproduces indoors or outdoors.
It is to cut a young and healthy part of the plant and put it into the water or in the ground so that it formed roots, so the new leg is obtained by plants. Not the same fragment: it may be a twig, a sheet, a piece of root, etc.
The division of certain cultures often has its own characteristics. So, for example, when the peony is reproduced, you should not use large deteen with a large number of kidneys and many long roots, as it will hurt long and weakly bloom.
For faster, a large Iris bush was formed, the decene sit down around the circumference or rows, taking into account the area necessary for the adult plant, etc.
The success of cuttings varies from one species to another and is never fully guaranteed, but this is a method that does not cost anything. To increase your chances, it is strongly recommended to make several cuttings of the same plant. In any case, the small "experimental" side is all charm of cuttings.
The cuttings should be made early in the morning and immediately after cutting the plant. In general, we choose a beautiful shooting that cut clean, a few millimeters under the node, in this often a convex part where leaves, flowers or kidneys are inserted. It is in this node that roots or new roots will be created. We can also cut off right under the crossroads between the young victory and senior stem.
In the division of the loyal, the old roots are cut, leaving no more than 7-8 cm, the sections of the sections are sprinkled with ashes.
Before boarding the deceit, it is desirable to dip in the clay tank. For its preparation on 10 liters of water, a small amount of clay is added (so that after foaming to the chattering on the hand, a thin layer of clay remained), 1 tablet of heteroacexin or Packet Korevin (you can any other stimulant of the root formation, according to the instructions) and 1 kg of fresh manure. Components add in the specified order. The root-processed roots are necessary for 30 minutes to dry outdoors, and then plant the decens into prepared, moistened pit.
Division bush
Some Perennials (Priorices, Carnation, Perennial Lukes, Budrut Plude, Veronica, Oils, Ordinary, Bell, Pharmaceutical, Lily, Geranium, Major, Major, Margish, Medicinal Medicine, MEDODED Roofing, Customs Common, Peony Escape, Timyan, Sage, etc.) , forming subsidiaries, determine the division of the bush. If the bush is loose, then the rhizome is cut to the shovel, if a dense is, then all the plant is digging, inspecting, removing all dubious places, then sedient plants are separated by a sharp knife. When landing a decene in the landing pits add a compost or fertilizer of a long action. Dellets are planted immediately, on the same depth as before, but for a longer distance.
Reproduction of cuttings
Many decorative perennials reproduce with cuttings. You can use three types of cuttings:
- stems
- leafy
- root.
Best reproduce perennials stem or green cuttings, rooting them in open soil On shaded beds.
Terms of workpiece Chenkov
It is very important for success. the term of the billet Chenkov. It is determined by the nature of the growth and development of the uterine plant. According to these features perennials divide into two groups.
TO first group Types of active growing of young shoots over most of the growing season. These include:
- all perennials with winter overhead escapes,
- plants forming pillows and turns;
- rhizopy, corneupry, columnar plants with grassy shoots, blooming late in autumn or flowing early in spring, but differ in prolonged vegetation, the ability to form summer sockets of leaves and shoots.
This group of plants during stalling easily forms the apparent roots, it is possible to harvest the cuttings for a long time - from the end of April to mid-August.
Second group Combines views with active future formation at the beginning of the growing season, sometimes continuing before flowering.
Soothes for cerebrals are made with healthy, well developed, pretty young (3-4-year-old) plants.
At species first group Long shoots can be cut on a cutting of 3 cm in size and more (2-4 interstices). In this case, the lower cut is made at a distance of 3 mm from the leaf node, the top is higher than the sheet node by 6-10 mm.
At species second group Not all of the escape is cut on the cuttings, but only the top of a young escape with concentrated interstices and weakly developed leaves when the escape has not yet become a hollow. Such cuttings give a higher percentage of rooting compared to more weighing cuttings from the bottom of the escape. An exception is peonywhich take the bottom of the escape with the heel. In moisture-loving plants with large or small, but strongly evaporated moisture leaves, part of the sheet plate is shortened by 1/2 or 1/3.
Reproduction with stable or green cuttings
Many spicy-taste plants (wormwoods, sage, mint, lavender, cottberry, etc.) are breeding by shuffling (wormwoods, sage, mint, lavender, and driving plants. Pruning is carried out in June-July, cutting up the tops of the shoots over the stubby kidney. The end of such a cutting should be slightly weed. All leaves, with the exception of two or three top, remove. The cuttings are planted into the sandy substrate, which should always be moderately humid, and are covered with a glass can or plastic bag. They are rooted for 3-4 weeks.
In some cases, the cuttings are not cut, but climb from the parent plant. In May, nyondyarn is so breed. When his shoots reached a length of 5-7 cm, they are climbed or cut off with a heel, leaving at least half of the shoots on the plant. The cuttings are planted in greenhouses or greenhouses, on the ridges, powered by a layer of pure river sand, to a depth of 1.5-2 cm; It is plenty and covered with glass or film. The cuttings are rooted, as a rule, quickly, for 10-15 days. About a month later, they can be planted in an open ground.
Reproduction of leaf cuttings
Some perennials, in which the apparent or sleeping kidneys are formed not on the stem in the leaf sinus, and on the basis of the extended end of the stuff or on the basis of the leaf plate of the sedental sheet (as, for example, at nyonday), can be multiplied sheet cuttings.For rooting, only fully formed leaves with normally developed cutters are suitable. Depending on the size of leafy stiffs, they are planted at a depth of 0.6-1.5 cm, having a slope in one direction. Ridges make in shaded places. For normal root formation, they support the constant humidity of the substrate at the expense of regular irrigation and spraying.
Reproduction root cuttings
Perennials, which in places injuries roots are formed by pressing kidneys, you can breed root cuttings. When separating part of the root from the motherboard, the kidneys develop new shoots with a new root system. Root cuttings are the most reliable way of breeding in primroses. They are digging no later than the first numbers of May. The roots are laundered and somewhat healthy are cut off with a knife directly under a sheet rosette. The separated roots are cut into pieces of 5 cm, and the lower cut is made oblique. The cuttings are planted one in a loose substrate oblique cut down. The straight cut should be at the substrate surface level. In the spring of next year they are planted for a permanent place. For the breeding of the shine, it is preferable to use long root cuttings (30-40 cm). They are digged in autumn, stored in the sand until spring, then planted, burrowing into the soil with a lower end by 10 cm, and the upper, thickened - by 5 cm.
In principle, the technology of reproduction with root cuttings provides for digging of the sumps with the preservation of all roots. Then the selection of the roots with a thickness of 0.3 ° C2 cm, which cut on a length of 5-7 cm with horizontal rows on the pre-prepared shaded bed. From above covered with a layer of sand with a thickness of 0.5 media Earth -2 cm, and then compact and watered. As practice shows, cuttings, harvested in August, are rooted within a month, prepared in September it is better to maintain for spring rooting to avoid posting during autumn landing.
Reproduction of bulbs
Among decorative perennials, vegetable crops There are enough bulbous plants that can be multiplied by bulbs.
Bulb - This is a long-term underground body that serves to preserve the basic nutrients and renewing plants after the rest period. By structure, this is a modified shortened escape consisting of a diagonal stem and scales - modified leaves. At the top of the Donets, an upheat kidney is formed, from which there is an overhead stem, leaves and flowers, on the bottom of the Donets - roots. The bulb may be a different structure:
- tiled (lilies) consisting of individual scales;
- concentric with closed internal juicy scales and with a covering fine outdoor scales (most bully);
The bulb can be many years or annually replaced by a new one.
The bulbous plants are planted at a depth, 3-4 times the superior diameter of the bulbs, and with such a calculation so that there are no empty space under the bulb. It is important to correctly arrange a bulb when landing: kidneys up, and roots or donings down. After landing - it is plenty.
Reproduction of tubers, clubnellukov, root, gods
Clubneelukovitsy
Some perennials (crocosmia, crocus) are equipped with nutrients in clubneelukovitsa, which also serve as material for breeding. Clubneelukovitsa appearance looks like a bulb, but has another building. This is the scorched bottom of the stem. It can be covered with a dense shell or have residues of lower leaves in the form of dry scales. For the vegetative period, the clubnevukovitsa uses nutrients and dies with roots (for some exception). Top above it grows by replacing the clubnelukovitsa, and from the sides - kids. Thanks large quantity Coupler, clubnellukovitsa can be cut into several parts that form a normal clubnelluca, sometimes blooming in the same year.
Tubers
Everyone knows that Georgina, potatoes breed with tubers. Tuber - stocking underground organ. By structure is modified escape, but he does not have a dona, nor the only point of height of the stem; The renewal kidney ("eyes") are scattered throughout the surface of the tuber. Tolls are thick, stuck, of different shapes; As it grows, it may increase or decrease in size. For reproduction, whole tubers are used or cut them into parts with one or more "eyes".
Corneelectric and root
Pip (for example, Topinambur) - Powerful substances are formed in the resulting powerful roots. They depart from the base of the old stem from one point. During the growing season, thin roots grow from them.
For reproduction of plants rootfields (All well-known carrots, beets, radishes, etc.) leaves in the rootfolds-royaltics are cut into so as to leave stiffs with a length of 1-2 cm and the top kidney.
Diggingyou can breed the plants whose shoots lying on Earth give appreciative roots, and new plants develop from the kidneys. Such a rooted escape is cut into parts by the number of new shoots formed and sear as independent plants - weapons. Landing material can serve adult plants (mint, basil, chamber, lavender, etc.), which before the onset of frosts are transplanted into the greenhouses, greenhouses or pots.
Selection and treatment of planting material, landing
- No matter how much the way it is elected for breeding and landing, it is necessary to remember that the seating material should be healthy, free from diseases and pests: various root rot, nematodes, phon. Therefore, during the billet of planting material, the plants will be examined for infection and conduct special processing to avoid the spread of infection or pests.
- The quality of the planting material directly depends on how your plants will look like: a thickness of the pins, the size of flowers, fruits, and the like. If the rhizomes are to divide too small, planting underdeveloped annual seedlings, small bulbs or green cuttings of the first year of rooting, then you will have to reap the fruits of failure: the plants of the first year, and some species and in the second year there will be weakly blossom.
- It is not recommended to transplanted non-small old bushes of perennials. As a result of a long stay in one place, shoots become crowded, the stems are thinned and are made weakly designer, and the flowers and inflorescences are very small. Therefore, old bushes need to be rejuvenated by dividing or thinning, i.e. By cutting part of the stems.
- All perennials breeded by seeds or vegetatively (except in cases where rhizomes are divided into large parts), it is necessary before landing for permanent sites to grow for 1-2 years on well-processed, fertilous ridges.
- Landing perennials is as follows. In the intended place, the pit is digging, the value of which allows you to freely place the root system of the plant. In the pit makes humus. Pre-viewed roots (broken, drowned removed with a sharp knife, slices are sprinkled with coal powder) are evenly distributed in the pit, fall asleep with the soil, they are frumped tightly and pour.
- The depth of planting depends on the size and type of plant. The landmark can be the root neck of the old escape, which should be at the same level, on which it was before landing.
- Plants with a roasting rosette of the leaves are planted so that the center of the socket is not broken into the ground.
Methods of reproduction of some floral annuals, perennials and vegetable crops
Digging
Bulk Creeping, Drug Pepper, Gusina
Bulbs
Bows, garlic, saffron, goose onion yellow, crocosmia
Tubers, cornklubs, root
Topinambur, Potatoes, Stainless, Batat, Batat, Zelenets, Zelenets, Tladynaya, Koznenik, Tladiant, Radest Floating, Flying Edible, Clean
Cherenca
Chrysanthemum, Rosemary, Sage, Major, Halfweight Estragon, Clover Creeping, Lavender Non-Talted, Halfweight, Gorgeous, Rabbard, Veronica, Dubrovnik White-felt, Establishment, Ordinous
Seed from seeds
Garden
: artichoke, basil, cabbage, eggplant, zucchini, patisson, melon, tomato, pepper, leek, onion Schitt, Physalis, Bummy, Celery, Cappers, Amaranth, Mayran, Lagenaria, Momordik, Tladyiant, Anguria, Kotovnik, Beninkaz
Garden : Velhets, Margarist, Issop, Calendula, Nather, Perill, Lufa, Badan
Rowers
Garden:
artichoke, sour, mint, asparagus, oregano ordinary, thyme
Garden : Geranium Largenevarian, Rapunzois-shaped bell, coltsfoot, Pijm, Halfweight Estragon, Flashing Flaper, Cane, Yarrow, Hop, Rhodiola Pink, Aiir Ordinary, Altea Medicinal, Badan, Tolstive, Vassilnicker Small, Veronica, River Gravel, Nather Dudnik, Libraner Creeping, Establishment Big, Canorouper, Heel Drug, Coupling, Laboratory, Gusina, Rogoz, Meadow Core, Susak Umbrella, Hammerion Nickname, Cmin, Roll
Dividing bush
Garden:
onion tubular, shallow onion, bow drooping, shallot bow, bowstock, lovers, marjorane, rhubarb, rosemary, asparagus, thyme, oregano ordinary, sage
Garden : Daisy, bell, Gardening carnation, Peony evaded, wormwood Bitter, Lily, Veronica, Medication Medicine, Plusheliste, Granki, Dubrovnik White-felt, Issop, Pheckle, Swan Garden, Multicrees, Fennelhele, Molded, Orchard, Orly , Primrose, root fragrant.
