Ideas for giving with your own hands for hammock. Manual for the manufacture of hammock for the street and at home

A hammock on a metal frame is simple, convenient and durable. The main thing is to make a reliable design, it can be collapsible or welded tightly - this is already the taste and the color of comrades is not.

And to make it easier for you to decide, consider different options for how you can make a stand for a hammock made of metal with your own hands.

Yes, if you have no hammock yet, do not hurry to buy it, you may decide and make it with your own hands - look into our article: "How to make a hammock with your own hands."

Metal rack for hammock do it yourself

Let's start our selection with options simpler.

In most cases, metal pipes round and square will be involved, we will discuss different options for their connection between them (which is especially relevant for those who have no welding).

So, the first rack for a hammock from round metal pipes without welding. In the photo below the left in the disassembled state, right - in the assembled form, ready to hang a hammock (by the way, two). How did they do? - See in the photo instructions below.

The author made three racks (for two hammocks), if you need to hang only one hammock, you will make two "tripods" accordingly. Each tripod consists of four pipe segments. Three are legs, and the fourth will go to the crossbar, which is in the future to hang a hammock. The crossbar is assembled from two halves, one triple is tied with a reduced pipe diameter at the end - so that it is tightly entering the pipe attached to another rack.

Here you may need welding: to welcome to the edge of one pipe a piece of a pipe of a smaller diameter to ensure a dense connection; And you can get rid of low blood, for example, to buy threaded pipes for crossbar and use fittings for connecting metal pipes.

A couple of words about the design. All that will be needed to connect three pipes is shown in the photo under No. 1.

Namely:

• Plugs on the pipes (at the bottom so that the legs are not drowned in the ground);
• Anchor bolts with rings and nuts to them (nuts should not be freely entering the pipe);
• Clap anchor with a threaded pin (for connecting together three rings from anchor bolts).

Actually everything is quite simple: in three pipes with a hammer to put together one nut, screw the anchor bolts in them. Which are then connected along with an anchor bracket. Next to the cord, tie the pipes "crossbar". And so to do two tripods.

Those. On the iron rack for a hammock (one) you will need: 6 cuts of steel pipe 180 cm., Two to 150 cm; 6 plugs; 6 anchor bolts with rings and nuts to them; 2 anchor brackets. Dimensions of pipes (length and diameter) can change at its discretion.

In addition, according to this principle, you can make a rack on the contrary for four hammocks. What can come in handy in the hike, on the hunt or fishing. Yes, and at the cottage to relax with friends will be quite by the way.

Alternative version of such a stand: drill holes in the pipes and connect them with bolts with nuts.

Please note: for greater stability, almost in the middle of the legs additionally connected the cord.

And one more modernization, but here you have already used welding. And notice the pipes, in the connecting places bolts, fightened. And as a crossbar board.

By the way, it is more convenient to work with a tree with a tree - perhaps you will like our selection more: "".

In addition, in the middle, they made stabilization with pipes and clamps.

In general, it turned out a good rack for a hammock made of metal.

Those who have welding can make the next iron rack for a hammock (it, by the way, can also be dismantled and collected at any time). In this design, only 4 legs. I will not paint everything, everything can be written in the photo, you can experiment with sizes.

This is how this stand looks assembled.

For greater clarity made marked with different colors.

Above the threaded pipes and fittings have already been mentioned for connecting metal pipes, with their help you can collect a very reliable support for a hammock.

To begin with, I offer you a visual scheme of such a rack for a hammock made of metal pipes.

And a couple of living examples.

And upgrades.

In a construction store you can find a lot of utilities. Give the will of your fantasy!

Stand for hammock made of metal drawing

I present to your attention a simple drawing of a stand for a hammock. To create a stand according to its reasons you need to be welded in one way or another. There are several different ideas under the cut.

The first option with a minimum of welding. Namely: to the supporting pipes (on which hammock hangs) was welded from the bottom of the segment of centimeters 15-20. Their bolt was recorded between two pipes at the base, which made it possible to create a solid design (which can be disassembled for convenient transportation or storage).

In the same stand, all the details are welded, and reinforcement rods are added from the outside, to stabilize the structure.

In this stand for hammock, the bottom "strengthened" by additional addition of iron corners on both sides along the entire length of the lower beam (the right top corner).

Video with an example of the assembly of the factory stand, in principle, by analogy (in the presence of the necessary materials and the skill), you can make such a stand with your own hands.

In the first two videos, a profile was used: 60 * 40 and 40 * 40 thickness 2 mm, the spyers - a band 80 * 5 mm.

By the way, you can use old pipes, if any. The finished metal stand for the hammock will paint into favorite color, and the result will exceed all the expectations.

And on the following photo, the example shows the desired thing: the system spreading racks. This is a great way to increase the distance between hooks on supports. After all, a hammock can stretch out or simply you want to hang a new hammock that is longer than the old one.

Factory model: On it, pay attention to the holes dried on the supports themselves (under the hooks), i.e. You can adjust the height of hanging hammock - another useful bonus.

The only thing for what I want to pay special attention is: in the above options, the location of the iron support may be unsafe in the bottom. Especially if you have little children! Either make it as low as possible to Earth and not too large. Either pay attention to the stand below with a rectangular basis.

And finally, the photo example from the "Author is burning" series. For the design of the design, special metal corners are used (in photo №1), but they did not insert a ram (which is much more appropriate), and metal pipes with a large diameter. It is difficult to imagine the weight of such a support, but one person will not turn it out. In general, experiment, but without fanaticism!

Original frame for a hammock made of hands

At the finish line, I offer you a hammock on a metal frame in the form of a boat, well, or who has any associations. True, to create such a miracle of technology, in addition to welding, a special machine with which the profile is spinning.

Such a round frame for hammock can be made from one pipe on the legs or collect from several parts.

I hope we answered your question: how to hold a stand for a hammock with your own hands from the metal. And I have everything on it. I wish you inspiration and creative success!

How sometimes I want to find that shadow that will give us freshness for a long time or luxury evening. And better than under the tree, we will not be anywhere! As if the sun was not trying to get us, and we are surrounded by branches in which it is easy to hide from the summer heat. Here it is just remembered by a hammock! The thing is irreplaceable! But purchased or too expensive, or too unreliable, and sometimes just uncomfortable.

I will try to show everything in detail and tell. You know, running in advance, I want to say that everything is actually very easy and just done! Available materials, no need to make a lot of place to manufacture, and on the money your hammock is at times cheaper, and this is despite the fact that for ourselves do not limit the quality of threads and other materials.

What do we need:

• Wooden durable planks (length - 1m, width and height - 3 on 2 cm) - 2pcs. Here I wrote the size of the planks. But you naturally can adjust it under yourself. Just keep in mind that there will be another rope size.
• Rope (cord cotton) - 200m.
• Metal rings (diameter 10cm) - 2pcs.

How we will do:

In both placters drill holes (12-14pcs) at the same distance from each other. The diameter of the holes should be such that 2 ropes can be skipped through them simultaneously.

You should not start doing holes in the planks, without retreating from the edges at least 5 cm. And it needs to be considered! After all, the width of the hammock itself is automatically reduced by 10 cm!

The planks are polished and covered with varnish. So they will be reliable and will serve longer.

A few words about choosing slats. You should not take the planks on which there are many bitch. This is unreliable wood and design from it will have low mechanical strength.

We prepare the ropes of the desired length. See, the calculation of the rope flow depends on the length of the product. You need to multiply the length to 3. and then only cut the rope. That is, if our hammock is 2.5 meters in length, then cut off 7.5 m rope.

How many ropes do we need? Exactly 2 times more than holes! Since 2 ropes stretched into one hole, then cut off 24-28pcs.

We stretch into each hole in 2 ropes. Pull them at a distance of 70cm. Bring these edges to the ring.

We make strong knots immediately under the plank.

We retreat 7-8cm and associate the rope in a checker order. And so every 7-8 cm.

So that the grid turned out to be smooth, and the strength of the structure depends on this, we use the ruler, plate, or any other dense strip the length we need (from 1m).

Immediately under the first nodes lay this plate. And right under it tie and tighten the nodes tightly. Then we move the plate below and tie the remaining ropes pairwise.

IMPORTANT! The last number of nodes must match the first! Ropes must be intertwined with the same couples as immediately under the plank!

And immediately after this series of nodes, they draw a pairwise rope into the opening of the second plank.

Measure the edge. Miffinate that the length of them is 70cm.

Bind the edges to the ring.

To compact the design, you can draw more tight ropes along the edges, to turn them through the edges of the grid. Stay these durable ropes and secure the knot behind the straps.

Detailed scheme of weaving in the technique of Macrame

In Macrame technique, a huge number of patterns that can be made from a thick cord or even rope. So we use it to weigh the hammock, comfortable, durable and beautiful! And yet, you can use another principle of fastening, not on two placters and rings, and tie a more "soft" design, without fastening base

There is another option - to lagging a dense tissue with a cord in the Macrame technique, and consolidate it on the planks.

But we will look at the method on the bar, only first we can weave the fabric of the right size.

Then they kpripim him to the planks (10cm longer).

• If the dimensions of the cloth 2.5 to 1m, then knit the grid of 20-30 loops (depending on the thickness of the cord).
• After the first row to associate the next, you need to turn over the web every time with a cloth up.
• Calculate the residue. It is necessary to make the knot to be on the edge of the row.
• The loop of the finished canvases to do in the holes of the wooden plank.
• We collect cords. At the edges, we make a loop on the size of the ring on which we will hang a hammock to the tree.
• Watch the loop with a free cord. Tear tense under the loop.
• Ring the ring in the loop, although you can cling and for the loop.

It remains only to choose the motive and on this scheme to tie the canvas. For example, it can be a "chess" - see the video technique of weaving:

Or any of the schemes:

Suspended chair-hammock in Macrame technique - master class

I will show a very simple model. In fact, it does not differ from a full-fledged hammock in which you can lie. But there is a difference - this is how the planks are attached. They are not horizontally placed, and one is fixed above, the second is lower. Between them there are wooden slats that connect the upper and lower base and allows the design to be stable.

A few words about the quality of threads. The fact is that the main emphasis will be on the bottom. Therefore, the threads should not be too stretched, ideally, if it is a thin cable or a dense synthetic rope, then the hammock does not grow soon.

What we need:

• Planks (1.6-2CM) - 2pcs;
• Rake (0.6-1CM) - 2pcs;
• Rope for weaving - 125-130m;
• Lowering rope for fastening - 4m;
• Screws and drill.

Mastery.

From each edge of both slats we make 2 holes. One - at a distance of 2, the second is 3.5 cm.

In those holes that closer to the edge, we insert thin rails. And so all 4 wooden foundations are connected.

Let the wooden foundation, so that it was more convenient to weave. Cut the rope on 8m (on 16 parts).

We fold the rope in half. We leave the loop ahead of the plank, we throw the edges behind the bar. Take the edge in the loop.

So fasten all 16 ropes.

We distribute all the loops evenly on the basis.

Take the first 4 ropes (from 2 loops). The rope that is extreme on the right bend at a right angle, we put on 2 ropes coming and taking it under the left left.

We spend the left rope for two, which are nearby and proceed to the loop on the right, which formed we have formed when we bent the right rope.

Slightly tighten the nodules. So we do with all the ropes.

To make a second series, depart OK.7SM. We skip the extreme 2 ropes. We take into the hands of the following 4 ropes and we do everything with them the same thing that was done in the previous row: we throw the extreme right in the extreme left; Left do in the right loop.

And so the whole range. Weave until we have the tips of the rope about 20 cm.

Tightly tie the edges on the bottom plank.

Chair is ready! It remains to hang it.

We cut the clothesline for 2 halves 2m.

We produce the ends of the linen rope into the holes, which is at a distance of 3.5 cm from the edge.

At the ends of the rope we make strong sea nodes.

Everything! Let our chair! Simple, quickly, and wonderful rest we are provided!

Master class on creating a wicker hammock from the hoop - scheme and sizes

The main moment on which I want to draw your attention is braid hoop thread. There are 2 options how to do it:

1. We have a round base, in diameter it should be less wrap. And then we bind this basis to the wrap of the rope.
2. Weave directly on the hoop. We will talk about this option in more detail.

I will describe 2 ways to create a hammock from the hoop.

1 way. We fly 1 hoop and make a hammock-swing.

• Wrap the hoop insulation for pipes. He is soft and will not hurt, feel discomfort from touching a metal hoop or even injured with careless movements.
• From the opposite sides, we bind 2 ropes of a little longer than the diameter of the hoop.
• In the middle of the hoop rope overwhelming.
• The edges are tied in the same way from the opposite sides.
• And so, until we turn everything in a circle.
• Then we make a "cob". This cage tie a thin strong rope to the ropes with which it comes into contact.

Only the design remains!

2 way. Differs on weaving. He is pretty simple, detailed master class in video.

3 way. Of 2 hoops.

To us, in order to lay out the hoop with a diameter of 90cm, you will need 96m rope or cord. We cut this rope on the stripes:

• 6m - 8 parts;
• 5,5m - 4h.;
• 4.5m - 4h.;
• 4m - 2 parts.

How we will do:

• In pairly tie the longest (on 6m) on top of the hoop. How to bind? We have already said: To keep the cord tightly and did not slip, each part of the rope fold in half. The loop, where the middle of the rope, we throw the hoop in front. The tips will get behind the hoop, and then stretch into the loop and tighten. It turns out 4 rows of 4 ropes.
• And immediately fasten the position with the node, which we talked about in the previous paragraph, this is when the right cord comes for the left, and the left is stretched into the loop on the right.
• At the edges of these long ropes, we bind the rest - the closer to the edge, the shorter. We bind the same, pairwise, and only the shortest is tied with each edge one by one.
• The distance between the ropes (or rather, the rope bands - 6cm).
• The selected pattern is "chess". We talked about him above, and I gave visually on video to see how to weave him.

A source

Thus, you can leave 2 hoops: one - seat, the second is the back. Only we do not have all before Niza. See which scheme for connecting two hoops:

• Ahead two hoops together are associated.
• Rear - at the same distance from the middle of the back, bind hoops with ropes of the same length.

That is, the order is:

• Sitting in full.
• The back is just starting to lies.
• Connect the back with the seat.
• Slip the rest of the back to the connections with the seat. You can unnecessary threads that we have not accumulated, ending and leave hanging the fringe.
• We are tapping a hammock to the tree branch.

As you can see, everything is simple enough!

How to make knots for a wicker hammock - detailed instructions and drawing

Today we talked a lot about the weaving hammock. It is worth learn which nodes allow to hold a hammock firmly and not crawling, not falling! Well stretched hammock will allow fully rest, and not "lie" in the position when legs are found with your head.

I will show clearly how to fix a hammock, which nodes:

• Koya. If we are dripping a hammock to the ring.
• Selected. If the support is thin.
• Starting bayonet. With a thick support, this kind of nodes is the most reliable.

And here it is better to show. I understand it, so I picked up a video

Hamamak is a wonderful place to relax in the country. It is possible to sunbathe, rest, read books and even sleep. Stores are filled with interesting offers, hammocks now have for every taste, with canopies and without swings, from any material. But the hammock can be made by the photo or master class.

How to make a hammock with your own hands?

First you need to decide on the form and material for the hammock. Whatever the option is not selected, you need to buy high-quality materials, for the fact that the hammock did not come quickly into disrepair. Size distinguish hammocks on:

• Family (width from 180 cm)
• For two (width from 160 cm)
• For one (width from 140 cm)

It will be easier to make a suspended hammock of a rectangular shape made of fabric.

Necessary materials:

• Dense tissue 2 m long, 3 m wide
• Lamb fabric
• Lane Rope 100 m
• Denim Thread 3 Coils
• Two wooden sticks with a length of 90 cm, with a diameter of 2.5 cm.
• Scissors
• Lighter
• Sewing machine
• Drill

On wooden chopsticks on both sides, drill holes for the rope at a distance of 2.5 cm from the edge. We fold the fabric into three layers, the width of the product should turn out to be 1 m. Weigrate the edges by 2.5 cm we make the pumping seam around the perimeter, so that the seam can be inserted into the rope. For the typewriter we shoot the main seams.

From the additional piece of fabric, we make straps with a width of 15 cm, 60 cm long. It will take 4 straps on each side, we fold them twice and sew to the main product. Insert the stick on both sides in the straps, the hammock is almost ready.

By the length of the hammock insert the rope with a length of 6 m, stretch along the seam, traveled to the rope into the hole of the stick, tie the knot. It remains only to weave the rope. Cut the rope on 8 segments of three meters and 16 segments of 3.5 m.

The edges of the rope must be cut a lighter so that they do not bloom. Cut three meters will be in the middle between central straps, and 3.5 meters between the side. We fold the ropes twice, fasten from on a stick, tightening in the loop.

Ropes are necessary with the help of nodes of weighing among themselves, connecting at the end with side ropes. When everything is intertwined among themselves, we make a common knot and two pigtails are wearing from it, in order to further bind the trees on which there will be a hammock.

Using bright colors fabric, you can make a unique and interesting hammock, which will stand out from the overall picture. Hang bright hammocks better in the shade to sun ray The fabric did not survive.

Sticks for rope fasteners, it is better to handle with grinding machine or shallow sandpaper. Also in avoiding the rope leg, it is necessary to cover them with varnish.

From the remains of the fabric you can sew a handbag for the smallest things, which will be mounted on the side with the help of the clothespins, it is convenient to put water, books or just a phone.

Pillows in a hammock can be fixed with rope so that they do not fall from the wind.

If you take a cloth in short, the hammock will be less and vice versa.

Optionally, you can sew a larger hammock, using more tissue and larger diameter sticks and lengths.

If there is no possibility to fix the hammock on the trees, you can independently make the basis of the bar. Additionally, you can make a canopy to relax in the shade on hot days.

Of course, woven hammocks may look more interesting and spectacular, especially if you use ropes of different colors. Weaving Hammaka is a very difficult procedure, there is a skill here. If difficulties are not frightened, on the Internet you will need to find a scheme of weaving and master classes with detailed explanations.

When using a hammock at the cottage, it is worth considering the most comfortable attachments in advance. For the winter, Hamak should be removed so that it does not deteriorate from weather conditions. It is also possible to conveniently install a hammock in different places, when traveling to nature.

Homemade hammock

The apartment can also make a hammock for at least children. You can sew a hammock according to the previous master class, changing the fastening and size.

In the apartment two main questions "where to install?" And "how to fix?" You can hang the hammock on the installed mounts in the ceiling or walls, if you do not want to spoil the recent renovation, it is possible to fix the hammock on a children's wall.

If there were no places in the house, and a hammock to hang children really want. You can take long fabric and tied up through the tabletop from the table. It turns out a very successful homemade, which does not require additional effort and costs. After the game is easily removed and removed into the closet.

Photo of hammocks do it yourself

Reading time ≈ 4 minutes

In the country, I want to have your own cozy corner, where you can relax in the shade of trees in the fresh air and listen to the chirping of birds. To do this, you can make a comfortable hammock with your own hands, which will also serve as an additional decoration of your own site.

Selection of material for hammock in the country

The process of creating such a product does not require great knowledge and skills. A hammock can be made of a wide variety of materials, the main thing is to show a mixture and all your creative abilities to make a unique product with your own design.

For the manufacture of hammock, you can apply the most different tissue tissues or weave it from thick ropes using the macrame technique. When choosing a material, it is important to pay attention to its strength and wear-resistant characteristics to ensure that the product is reliable and durable.

In this article we will look at the original master class, how to make a hammock with your own hands from non-standard materials. The base of the product will be manufactured from multi-colored tight tape. Such a bright hammock will be a real work of art and will have an incredible impression on your guests.

Manufacturing hammock

We start working with the acquisition of materials. For the manufacture of hammock, we will need two wooden dowels with a diameter of about 3 cm and a length of 120 cm and three rolls of dense adhesive tape preferably different colors. The more scotch width, the easier and faster the process of creating our masterpiece will be faster.

The product will be made with the use of techniques, similar to weaving fabrics on a weaving machine. Therefore, to facilitate our task, it is advisable to make a wooden basis with dimensions that coincide with the sizes of the future hammock.

To do this, choose two wooden bars of the desired length and nourish our prepared dowels to them. The resulting distance between the bars will correspond to the width of the product, and between the dowels - its length.

After preparation of the frame, the process of weaving begins. We start working from the left upper edge of the product. On the dowel, the loop of the sticky tape is made, then the tape is pulled over the entire length of the product and fixes on the opposite side also with a loop. Scotch is lined up so that sticky parts overlap each other and the product on both sides had a smooth surface.

Thus, alternating different colors of the tape, we sweep the products across the width. It is important to leave a small gap between the ribbons so that the transverse parts of the structure can be traversed.

For the next stage, we will need a ruler and pencil. So that transverse tapes lay on our cloth at the same distance, it is necessary to note on the edges of the place for their location. The distance between the transverse ribbons should approximately match the scotch width. Then the product will succeed with more attractive external speciesconsisting of identical multicolored quadraticles, and will be stronger and more reliable.

To make it easier to make transverse tapes, at the end of the scotch, you need to consolidate any hard object that will perform the role of shuttle. After that, the process of type of weaving production begins. Working the shuttle up down, we pass the ribbon across the entire width of the product and fix the transverse component from the front side.

Thus, we stretch the transverse tapes at the same distance from each other along the entire length of the hammock for giving. When weaving work is over, wooden bars are separated from our design and the final stage begins.

Finishing stage

So that our successful homemade can be fastened between adjacent trees or made for these objectives with racks, you need to prepare two durable thick ropes of the same length. The ends of the rope are firmly tied around the edges of our wooden dowels. For greater reliability, on top of each node, it is desirable to hire the remains of our skotcha in several layers. The work is over.

The time of self-making a hammock will take no more than 3-4 hours. Detailed step-by-step instruction, as well as visual photos and video materials will help you quickly and easily perform all the work. An interesting original hammock will be a favorite accessory for relaxing in nature.

Video how to make a hammock with your own hands

A hammock is a convenient and original leisure device. It can be installed, both in the country and within its subsidence. But in order for him to be a support, a frame for hammock is necessary. In addition to conformity to certain dimensions, the design should also be quite strong to maintain the safety of your holiday at the proper level.

This article will contain information about different types Such adaptations, as well as their advantages and disadvantages. In addition, you will be able to familiarize yourself with the manufacturing stages and price offers for this category of goods in Moscow and the Moscow region.

The most important part of the device hammock - frame source Pogranec.ru

Hammak: types and device

First, it will not be superfluous to tell about what the hammocks are, and what the features of the device of these leisure devices are concluded. The main types of hammocks are only two.

Wicker hammock represents netsimilar to a fishing, made of thick and durable rope or rope. In the first case, weaving in two threads can be used, and the diameter of each vein should be about 3 cm. The cells are shaped rhombus with a side of 5 to 10 cm. Length and width hammock can be different and selected depending on your personal preferences. At the ends of the canvas, there are necessarily a planks, driving the network, and all the ends of the threads are collected in the harness where some fastener is located.

Source yandex.uz.

Also there is fabric hammocks. They are also called mexican cocoons. They are stitched from thick and durable slove of matter, such as tarpaulin or canvas. The opposite ends form the harness to which the fastener ring or hook is fixed.

Source kolesa.kz.

Even meet hammocks-sites. Usually they are used in combination with arbor. Blights For such a chair has small size, but fastening is located on top.

Source NewsBuzz.ru.

The choice and purchase of a rack for a hammock in many ways depend on which of the three existing species you want to install on your site.

Design frame for hammock

This is usually a system of beams and racks that creates a hard and reliable support. Mounting nodes are located approximately four meters away from each other and provide support of the hammock in the stretched state. Ideally, it should be located so that the distance to the Earth is approximately one and a half meters. Then the person will be comfortable to sit into it, and at the same time, provisive, Hamak will not get to the ground.

Supports must have high strength. Their diameter is usually at least ten centimeters. Also, the dimensions of the rack depend on how much a person is intended for a rest. With an increase in the area of \u200b\u200bthe canvas, measures must be taken to improve the strength and stability of the structure.

Source diydrywalls.org.

The carcass hammock takes over not only the vertical, but also horizontal load arising when landing and rocking. Therefore, the design of such a system necessarily includes the following elements:

Vertical Rama - This is part of the device, stretching hammock. It consists most often from two or more Racks or arcs.

Horizontal crossmen - this is legson which rama relies. They are designed for preventing overturning design And usually designed on significant loads. Their width should be more meter. In this case, they provide due sustainability.

Basically, the carcasses for hammocks differ in their frames. There are two types of design of this element. The first is in the form of an arc. Externally resembles the rocker. The second is a trapezium with a small base. To strengthen the lower part of the system, various additional elements often use. It gives the width and reliability of the combination with legs.

The entire rack can be welded if it is made of metal. If the tree was used to create it, then the bolts, self-tapping screws or nails are used as fittings. All bolted connections are required to be complemented by control rods, because such a design is dynamic.

Source poiskpodarkov.com.

On our site you can familiarize yourself with from the best construction companies With a flawless reputation in the market. A wide choice, an acceptable price from 51050 rubles, flexible conditions and quality guarantees allow you to choose the appropriate option to any budget and implement all the wishes of the client. Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

Stand under the hammock can be both stationary and collapsible. The first is used in one place for a long time, so it is provided for it a durable hitch with a soil. The second option can be dealt and transferred to any point of the section. This species is well suited if you like to take a hammock with you to nature.

Sometimes the frames consisting of two frames connected from above are used. Also there are designs in the form of parallelepiped. The advantage of such schemes is their stability. But it should be noted that these racks require that two mounts on each side be on the hammock. If you want to stay in the shade, and there are no trees or arbors nearby, then you will suit the design, consisting not only from the stand, but also from a small canopy.

Source kolomenka.ru.

Materials for making racks for hammock

Most often, galvanized steel is used to produce such devices. For greater durability, it can be painted. Such material has sufficient strength and resistance to environmental conditions.

The tree has excellent decorative qualities. If it is covered with protective agents, it will protect the stand not only from fungal diseases, but also from fire. Most often for the manufacture of frames, the timber is used 50 * 100. Wood necessarily requires careful drying. In the plan of breeds in most cases, ash applies ash, beech or glued pine.

The accessories should be selected with a zinc coating, because the rack under the hammock provides an open-air installation, and, it means that it requires protection against corrosion.

On our site you can find contacts of construction companies that provide . Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

Frame prices for hammock and manufacturers

In our country, the coasters from Italy, Brazil and China are the most popular. However, the most qualitative and budget options Are domestic racks.

Source MVVD.ru.

A rather cheap frame under the hammock will cost you about 3,400 rubles. This product is called "Murom 1" and produced in Russia. There are Chinese analogues that have a similar design and structure. A little more expensive will cost Kazan Leco-IT Green. Its price is approximately 3,600 rubles. If you prefer a stand from the array, then the factory from the city of Stary Oskol offers you a frame for Hamak Ultra for 18,000. It will be more expensive than the Stand of the Italian manufacturer Venezia. The price of such a product will be from 20 to 22 thousand rubles. Brazilian carcass from tropical tree breeds will cost almost 150,000 rubles.

Often the manufacture of such designs are engaged in private workshops. The framework of such producers is characterized by a lower price, compared to corporate products.

Warranty on such products is usually 1-2 years. In fact they can be used up to 30 years.

Video Description

Video Overview of the metal holder for hammock standard-1 and device assembly stages:

The process of macass manufacturing

Most often for production used ash-timber. The design of the simplest frame includes two color, which are attached to the base at an angle of 45 degrees. The base itself consists of a strapping of two bars. Also, the disclosures must be fixed by the power units, which are also attached to the strapping.

Simple but very stable and reliable design From the aspen bar Source Pointerneti.ru.

At an altitude of about 1.4 m, ry blocks are installed on the disclosure. They are needed for hammock pendants. A rack for a hammock made of wood should include two barracks that perform the functions of the horizontal support.

During the manufacturer, the first thing all the timber is cut down in length and after processing and polishing is covered with antiseptics and antipirens. Then they take one of the strapping slats, the power supports and disclosures are applied to it, pre-connected. Next, the top of the strapping is installed on top and in right places A holes are drilled, a diameter equal to the diameter of the bolts. For each joint, you should use at least two bolted connections. After that, the bolts are tightened until it stops.

The next step is attached to rock blocks and paws. This is the process of making a stand. But after complete assembly, the entire surface of the bar can be painted and hidden by varnish in decorative purposes. Such a design for a hammock is inexpensive and distinguished by reliability and stability.

Source qirarygo.ga.

Video Description

Video instruction with a master class for the manufacture of a frame and hammock with their own hands:

Conclusion

The use of hammock creates an atmosphere of comfort and relaxation. This way of rest is distinguished by its convenience, and many people in warm time even sleep in the hammocks at night. Therefore, it is necessary to take care to supplement such a place to relax a reliable and durable support that provides security and comfort. Now you know what carcasses and stands for hammocks are, as well as what to pay attention to when buying them. Undoubtedly, it will help you to purchase such a device for your cottage or courtyard.